Prices + Stock updated 8 Sep @ 10:05
BASF UltraFuse BVOH Dissolvable Support - 2.85mm - 350g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to ABS, PET and PLA
Features
Specs
Support
Printing complex designs may only be possible with temporary support structures. Dissolvable support material saves post-processing time, and allows supports to be removed from locations that may otherwise be difficult or impossible
Ultrafuse BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility increases with higher water temperatures.
It offers great compatibility to a variety of materials including: PLA, PLA PRO1, PET, TPU, ABS, ABS Fusion+, PA and PAHT CF15.
IMPORTANT! Store this monofilament in a sealed bag, container or dry cabinet to prevent moisture uptake.
Next >
- Butenediol Vinyl Alcohol Co-polymer (BVOH) filament
- BASF Ultrafuse BVOH - 1.75mm - 350g
- Colour: Natural Yellow
- Diameter: 1.75mm
- Weight: 350g
Product Dimensions: 215x220x70
Next >
Recommended 3D-Print processing parameters
Nozzle Temperature: 190 – 210 °C / 374 – 410 °F
Build Chamber Temperature: not required
Bed temperature: 60 – 100 °C / 140 – 212 °F
Bed Material: Glass
Nozzle Diameter: = 0.4 mm
Drying Recommendations:
Drying recommendations to ensure printability; 60 °C in a hot air dryer or vacuum oven for 4 to 16 hoursThis product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
Material Safety Data Sheet
Technical Data Sheet
This product is in the categories:
Related Products:
Buy Now
BASF UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 750g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to ABS, PET and PLA
Buy Now
BASF UltraFuse BVOH Dissolvable Support - 2.85mm - Natural - 750g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to ABS, PET and PLA
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15