Prices + Stock updated 8 Sep @ 10:05
3D PrintPRO 3 Fume Extraction Unit - Inlet and Outlet Ports
The BOFA 3D PrintPRO 3 incorporates externally mounted plenum system manifolds, which effectively captures fumes generated during the printing process and returns ultra clean, filtered air to the machine or the operators breathing zone.
Features
Specs
Support
It has the benefits of low noise level and minimal power consumption.
Each unit is supplied with a connection hose, ‘Stay Put’ arm and conical shaped funnel.
Print your own extendable manifolds 3D drawing files can be found at:
bofainternational.com/en/print-your-own
Key features of the 3D PrintPRO 2
- Digital Speed Control
- Filter change indicator
- 3 level filtration - pre, HEPA and chemical filters
- Hose kit included
- Low Noise level
- Powder coated for durability
- Small footprint
- Compact size
- 24V remote stop/ start interface optional (see product fumePP3x24V)
Next >
Technical data
- Dimensions: 400 x 290 x 300mm (HxWxD)
- Cabinet Construction: Powder coated mild steel
- Airflow / Pressure :150m3/hr
- Electrical Data: 230v 1ph 50/60Hz Full load current: 0.7 amps
- Noise Level :<57dBA (at typical operating speed. Run normally at 3/4 speed, only use full speed when the filter is awaiting replacement)
- Weight: 11kgs
- Approvals: CE
Hose Kit Contents
- 2pcs of 1m long x 50mm diameter flexible hose
- 4pcs 50mm diameter cuff for hoses
- Print Your Own inlet / outlet manifold files by download (prints NOT supplied in kit)
Pre-Filter Specifications
- Filter media Glass fibre
- Filter media construction Pad
- Filter efficiency 96% @ 2 microns
Combined HEPA / Gas filter specifications
- HEPA filter media: Glass fibre
- HEPA media construction: Maxi pleat construction with webbing spacers
- Gas filter :Treated activated carbon
- Filter housing: Zintec mild steel
- Filter efficiency: 99.997% @ 0.3 microns
Replacement filter part numbers
Pre-Filter A1030102 (see ptFilterPP2pre)
Combined HEPA / Gas filter A1030099 (see ptFilterPP2)
Note: The carbon used in BOFA units is capable of removing a wide range of VOC’s, however it is the responsibility of the user to ensure the carbon is suitable for their application. For specific applications, please contact us for details.
Product Dimensions: 290 x 270 x 400mm
Next >
This product is in the categories:
Related Products:
Buy Now
3D PrintPRO 3 Fume Extraction Unit - Inlet and Outlet Ports PLUS 24V Add-On
The BOFA 3D PrintPRO 3 incorporates externally mounted plenum system manifolds, which effectively captures fumes generated during the printing process and returns ultra clean, filtered air to the machine or the operators breathing zone.
This version includes a 24V connection for switching the unit on and off from your printer.
Buy Now
3D PrintPRO 2 Fume Extraction Unit - Basic
The BOFA 3D PrintPRO 2 is a low cost unit, which extracts fumes generated by an open
framed 3D printer without causing the filament deposition area to be cooled.
Buy Now
Pre-Filter for the 3DPrintPRO2 and 3 (5 pack)
Glass fibre pre-filter pads for the 3D PrintPro2 and 3
Buy Now
Combined Filter for the 3DPrintPRO2 and 3
Combined Gas and Fume filter for the 3D PrintPro 2 and 3
Buy Now
3D PrintPRO 2 Fume Extraction Unit - Basic PLUS 24V Add-On
The BOFA 3D PrintPRO 2 is a low cost unit, which extracts fumes generated by an open
framed 3D printer without causing the filament deposition area to be cooled.
This version includes a 12-24V connection for switching the unit on and off from your printer.
Buy Now
3D PrintPRO 4 Fume Extraction Unit - Large - 2021 Model
The BOFA 3D PrintPRO 4 provides a high fume evacuation and filtration rate when connected to a large enclosed 3D printer via its extraction offtake point. The system can also return the ultra clean, filtered air either back to the printer enclosure for a cleaner print area or to the operator’s breathing zone.
Buy Now
3D PrintPRO 4 Fume Extraction Unit - Large PLUS 24V Add-On
The BOFA 3D PrintPRO 4 provides a high fume evacuation and filtration rate when connected to a large enclosed 3D printer via its extraction offtake point. The system can also return the ultra clean, filtered air either back to the printer enclosure for a cleaner print area or to the operator’s breathing zone.
This version includes a 24V connection for switching the unit on and off from your printer. These are made to order, and you can choose from a variety of connection options.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15