Prices + Stock updated 23 Aug @ 18:05
0.4mm Nozzle - M6 Thread for E3D Hotend - Brass - 1.75mm Filament
Brass nozzle for the E3D v5/6 hotend
Features
Specs
Support
Compatible with:
- E3D v4, 5, 6 hotend with 1.75mm filament
- J-Head
- Prusa i3 MK2 / MK2S / MK3 / Mini
- Creality CR-10
- Anycubic
- JG Aurora
Next >
Specs
Hole:0.4mm hole.
Thread:M6, 7mm Long
Total Length:12mm.
Head width: 7mm
Base Flat at screw/thread end
Tipmay have a slight flatened area
Filament Size: suitable for 1.75mm filament.
Product Dimensions: 12 x 7 x 7mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
This product is in the categories:
Related Products:
Buy Now
Nozzle Set for 1.75mm Filament - Brass - E3D v6 style
Have a range of spare nozzles, heater blocks, silicon socks and tools on hand for when you need them.
Buy Now
0.4mm Nozzle - M6 Thread for E3D Hotend - TwinClad - 1.75mm Filament
Nozzle for the E3D Hotend with a Wear Resistant Twin Clad coating for long life
Buy Now
0.2mm Nozzle - M6 Thread for E3D hotend, 1.75mm Filament, Brass
Brass nozzle for the E3D v5/6 hotend
Buy Now
0.4mm Nozzle - M6 Thread for E3D Hotend - Stainless Steel - 1.75mm Filament
This nozzle for the E3D V5/6 Hotend is Stainless Steel for extra long life
Buy Now
Hot End - E3D v6 clone - 1.75mm Filament, 0.4mm nozzle
This complete hot end is based on the All-Metal J-Head design as modified by E3D (V6). Includes everything you need, hot-end wise for 1.75mm filament
Buy Now
0.8mm Nozzle - M6 Thread for E3D v5/v6 hotend - Brass - 1.75mm filament
0.8mm Nozzle for E3D v5/v6 hotend, 1.75mm filament, brass
Buy Now
0.6mm Nozzle - M6 Thread for E3D v5/v6 hotend - Brass - 1.75mm Filament
0.6mm Nozzle for E3D v5/v6 hotend, 1.75mm filament, brass
Buy Now
0.3mm Nozzle - M6 Thread for E3D Hotend - Brass - 1.75mm Filament
Brass nozzle for the E3D v5/6 hotend
Buy Now
0.5mm Nozzle - M6 Thread for E3D Hotend - Brass - 1.75mm Filament
Brass nozzle for the E3D v5/6 hotend
Buy Now
0.2mm Nozzle - M6 Thread for E3D Hotend - TwinClad - 1.75mm Filament
Nozzle for the E3D Hotend with a Wear Resistant Twin Clad coating for long life
Buy Now
0.2mm Nozzle - M6 Thread for E3D hotend, 3mm Filament, Brass
Brass nozzle for the E3D v5/6 hotend
Buy Now
0.4mm Nozzle - M6 Thread for Ultimaker or E3D Hotend - Twin Clad Coated - 3mm Filament
Nozzle for the E3D Hotend with a Wear Resistant Twin Clad coating for long life
Buy Now
0.4mm Nozzle - M6 Thread for E3D Hotend - Brass - 3mm Filament
Aftermarket Brass nozzle for the E3D v5/6 hotend
Buy Now
Hot End - E3D v6 clone - 1.75mm Filament, 0.4mm nozzle - Direct Drive
This complete hot end is based on the J-Head design as modified by E3D (V6). Includes everything you need, hot-end wise for 1.75mm filament.Note this is a PTFE lined system
Designed for extruders using direct drive filament feeding (2mm hole at top)
Buy Now
0.6mm Nozzle - Hardened M6 Thread for E3D v5/v6 hotend - 1.75mm Filament
0.6mm Nozzle for E3D v5/v6 hotend, 1.75mm filament, Hardened
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15