Prices + Stock updated 23 Aug @ 18:05
This item is no longer available. This information is for reference only
Kimya ABS Conductive - 1.75mm Black - 500g Spool - UNTIL SOLD OUT
This item is no longer available, you cannot order it
Kimya ABS-EC filament is ABS-based with the main features being electrical conductivity and good thermal resistance.
It possesses the same characteristics as our Kimya ABS-ESD filament, with the exception of its surface resistivity, i.e. its ability to oppose the flow of an electric current. This is lower than in Kimya ABS-ESD. Thus, it allows electrons to circulate more rapidly, as in metals.
Features
Specs
Support
Kimya ABS-EC is a thermoplastic based on ABS, one of the most common polymers on the additive manufacturing market.
ABS is produced by the co-polymerization of three co-monomers: acrylonitrile, styrene and butadiene.
ABS was one of the first materials to be used in industrial applications, due to its resistance to impact, heat and ageing. Moreover, it provides a good degree of rigidity and robustness.
Printing an ABS filament requires close control of its build plate temperature because the thermoplastic peels off more easily, but also ensuring that it shrinks on cooling.
Next >
More Information
Filament Properties
Property | Test Method | Result |
Diameter | INS-6713 | 1.75 ± 0.05 mm
2.85 ± 0.05 mm |
Density | ISO 1183-1 | 1.035 g/cm3 |
Moisture rate | INS-6711 | < 0.5 % |
Melt flow index (MFI) | ISO 1133-1 (@260°c – 10 kg) | 8 - 16 g/10min |
Glass transition temperature (Tg) | ISO 11357-1 DSC (10°C/min - 20-300°C) | 108 °C |
Recommended Print Parameters
Printing Direction | XY |
Printing Speed | 45 mm/s |
Infill | 100% - rectilinear |
Infill Angle | 45°/-45° |
Nozzle Temperature | 260°C |
Bed T° | 95°C |
Printed Specimin Properties
Property | Test Method | Result |
Electrical Properties |
Surface resistivity | ASTM D257 | < 106 Ohms/m² |
Mechanical Properties |
Tensile modulus | ISO 527-2/5A/50 | 2.398 MPa |
Tensile Strength | ISO 527-2/1A/50 | 36.7 MPa |
Tensile strain at strength | ISO 527-2/1A/50 | 2.3 % |
Tensile Stress at Break | ISO 527-2/5A/50 | 29.2 MPa |
Tensile strain at break | ISO 527-2/5A/50 | 5.2 % |
Flexural modulus | ISO 178 | 1.393 MPa |
Flexural stress at conventional deflection (3,5% strain)* | ISO 178 | 49.3 MPa |
Flexural strain at flexural strength | ISO 178 | >5 % |
Charpy impact resistance | ISO 179-1/1eA | 27.6 kJ/m² |
Shore Hardness | ISO 868 | 67.2 |
Note 1 | *According to ISO 178, end of the test at 5% deformation even if there is no specimen break. |
Note 2 | The data should be considered as indicative values - Properties can be influenced by production conditions. |
Product Dimensions: 200mm dia. 55wide
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Technical Data Sheet
This product is in the categories:
Related Products:
Buy Now
Kimya ABS - ESD Filament - 1.75mm Black - 500g Spool
The ABS ESD is ideal for applications that require protection against electrostatic discharges.
Buy Now
Kimya ABS - ESD Filament - 1.75mm Natural - 500g Spool
The ABS ESD is ideal for applications that require protection against electrostatic discharges.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15