Prices + Stock updated 23 Aug @ 18:05
This item is no longer available. This information is for reference only
Raise3D Premium PVA - 1.75mm filament - 1kg Spool - UNTIL SOLD OUT
This item is no longer available, you cannot order it
Genuine Raise 3D Premium PVA Filament >> NOW REPLACED WITH PVA PLUS PVAP175RP750
Features
Specs
Support
PVA Filament is used as a support material that dissolves in water
PVA Filament absorbs water from the air very quickly - even on longer prints. We strongly recommend printing with this filament while it is in an enclosed (dry) container, such as the PolyBox
PVA is a dissolvable support material for PLA, TPU, Nylon and PVB (eg: PolySmooth) materials
Next >
- Material: Poly vinyl Actetate
- Colour: Natural
- Diameter: 1.75mm
- Net Weight: ~1kg
- Printing Temperature: 200-220 °C
Product Dimensions: 200 x 200 x 70mm
Next >
Key things to know when using Raise PVA
1. You must not let the PVA get above 15% humidity. Preferably store at 10%. This is vertually impossible without something like a polybox in Australia (where Sydney gets an average of 86% humidity and the whole east coast is almost always above 50%), and even then you will need to add extra silica to get to that level.
2. Some optical filament sensors see through PVA and you may need to run PVA in the left intead of right extruder for example
3. You need to adjust your Raise profile to select the extruder to print the raft and support in PVA. We find that printing the raft in PVA is better for adhesion of the support to the raft.
4. Reduce Raft to model gap to 0.1 or close to that.
Raise fact sheet on using PVA
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
Material Safety Data Sheet
This product is in the categories:
Related Products:
Buy Now
3DXTech Thermax High-Temp Support Material - 1.75mm - Natural- 500g
HTS high-temp break-away support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials. ThermaX™ HTS High-Temp Support can be used as a break-away support with:
- PEKK + PEEK
- Ultem PEI
- PPSU
- PSU
- PPS
Buy Now
PolyMaker Glass Fibre PA6 Nylon, Grey, 1.75mm, 150g Sample - UNTIL SOLD OUT
this is a sample coil of 150g only, so you can try a few prints before investing in a 2kg spool.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Buy Now
3DXTech AquaTek X1 Support Material - 1.75mm - Natural - 500g
AquaTek™ X1 Universal Water Soluble Support Filament
AquaTek™ X1 is an all-new advanced universal water soluble support material formulated specifically for printing complex parts.
AquaTek™ X1 is readily water soluble in warm water with excellent adhesion to the broadest range of materials - including popular advanced composite materials CarbonX™ Carbon Fiber Nylon and AmideX™ Glass Fiber Nylon.
Buy Now
PolyMaker Glass Fibre reinforced PA6 Nylon, Grey, 1.75mm, 2kg
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Buy Now
PolyMaker Carbon Fibre reinforced PA6 Nylon, Black, 1.75mm, 2kg
PolyMide™ PA6-CF is a carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
Buy Now
Raise3D Premium PVA PLUS Support Material - 1.75mm - Natural - 750g
Raise3D Premium PVA+ is a polyvinyl alcohol (PVA)-based cold water-soluble support filament for FFF 3D printing with dual extruders.
*Note- Not detectable In optical filament sensors as on Raise 3d Printers
Buy Now
PolyMaker Carbon Fibre reinforced PA6 Nylon, Black, 1.75mm, 500g
PolyMide™ PA6-CF is a carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15