Prices + Stock updated 23 Aug @ 18:05
0.4mm Nozzle - M6 Thread for Volcano Hotend - Twin Clad Coated - 1.75mm Filament
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating
Features
Specs
Support
This Micro Swiss Plated Wear Resistant Nozzle for Volcano Hotend 1.75mm Filament. It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better than nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive Carbon Fiber, Stainless Steel, wood filled or any other metal filled filaments, this will greatly improve the life of your nozzle.
To suit:
- E3D Volcano HotEnd for 1.75mm Filament
- Artillery Sidewinder X1
- Tevo Little Monster
Next >
Specifications
- M6x1 Thread
- Tapered inlet hole for 1.75mm filament
- Length : 21mm
- Thread Length : 15.9mm
- Head Length : 5.1mm
- Width : 6.9mm
Product Dimensions: 21 x 6.9 x 6.9mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
This product is in the categories:
Related Products:
Buy Now
0.6mm Nozzle - M6 Thread for Volcano Hotend - TwinClad Coated - 1.75mm Filament
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating
Buy Now
0.8mm Nozzle - M6 Thread for Volcano Hotend - TwinClad Coated - 1.75mm Filament
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating
Buy Now
1.0mm Nozzle - M6 Thread for Volcano Hotend - TwinClad Coated - 1.75mm Filament
Whether you want to print with less hassles or abrasive 1.75mm filament, this Micro-Swiss Twin Clad coated nozzle will give you much improved abrasion resistance, and a slight improvement to print quality thanks to the non-stick twin-clad coating
Buy Now
Hot End - Volcano Clone - 1.75mm filament, 0.6mm nozzle, 24V
Volcano compatible all metal hotend
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15