Prices + Stock updated 23 Aug @ 18:05
1.0mm Nozzle for MicroSwiss All Metal MK10 Hotend Kit-FFtc
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit the New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube
Features
Specs
Support
It is made from a 360 brass base material and plated with TwinClad XT coating. TwinClad XT is a nickel composite coating designed for very low friction. It offers one of the lowest coefficient of friction, better then nickel with PTFE codeposit. This coating is also very hard and abrasion resistant. If you are working with abrasive filaments like Carbon Fiber, Aluminates or metal filled, this will greatly improve the life of your nozzle.
Also available in 0.2, 0.3, 0.4, 0.6, 0.8 and 1.2mm sizes
Next >
Specifications:
- Hole:1.0mm hole.
- Thread: M6, 4mm long.
- Total Length: 13mm.
- Head width: 9mm (for better heat retention)
- Base: Flat at screw/thread end (click photo under more info page for details).
- Tip may have a slight flatened area.
- Filament Size: suitable for 1.75mm filament.
- CoatingTwinClad Coated
Is is compatible with the following machines where the MicroSwiss upgrade is fitted and no PTFE lines barrel:
- FlashForge Creator Pro
- FlashForge Creator X
- FlashForge Dreamer
- Flashforge Finder
- Flashforge Guider
- Dremel Idea Builder
- PowerSpec 3D Pro
- PowerSpec 3D X
- Wanhao Duplicator 4S
- Wanhao Duplicator 4X
- Wanhao i3
- Monoprice Maker Select 3D Printer v2
- Cocoon Create 3D Printer
Product Dimensions: 13 x 9 x 9mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
This product is in the categories:
Related Products:
Buy Now
All Metal Hotend kit for MK10 extruders-FFD-FFtc
Genuine Micro-Swiss all metal hotend upgrade for MK10 style extruders.
MK10 Extruders most notibly used on the FlashForge Dreamer, Inventor1 and Creator Pro 2016 and Dremel Idea Builder. It also fits the Wanhao i3 and Cocoon
Buy Now
0.2mm Nozzle for Micro Swiss All Metal MK10 Hotend Kit-FFtc
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit the New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube
Buy Now
0.3mm Nozzle for Micro Swiss All Metal MK10 Hotend Kit-FFtc
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit the New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube.
Buy Now
0.4mm Nozzle for MK10 Micro Swiss All Metal MK10 Hotend Kit-FFtc
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit the New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube
Buy Now
0.6mm Nozzle for MicroSwiss All Metal MK10 Hotend Kit
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit the New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube
Buy Now
0.8mm Nozzle for MicroSwiss All Metal MK10 Hotend Kit-FFtc
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit the New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube
Buy Now
1.2mm Nozzle for MicroSwiss All Metal MK10 Hotend Kit-FFtc
This is Micro Swiss MK10 All Metal Hotend ONLY style nozzle, it will ONLY fit the New MK10 All Metal Hotend. This nozzle has completely different internal dimensions to work with our Micro Swiss thermal barrier tube
Buy Now
Bilby3D All Metal Hotend Kit for FlashForge Finder, Inventor 2/2S/2SE-FFtc
Custom made by Micro-Swiss for Bilby3D, this all metal hotend upgrade for the FlashForge Finder, FinderPlus and Inventor2 has a thicker barrel to reduce damage during fitting and and operation
Buy Now
MicroSwiss All Metal Hotend Kit for FlashForge Finder, Guider, Inventor 2/2S/2SE-FFtc
Genuine Micro-Swiss all metal hotend upgrade for the FlashForge Guider, Guider 2
Finder, FinderPlus and Inventor2 recomend - ptKitMK10TC3
Comes with 0.4mm nozzle, range of other sizes available
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15