Raise3D Industrial PPA GF is a glass fiber-reinforced composite filament material based
on PPA (polyphthalamide or high-performance / High-Temperature Nylon).
Raise3D Industrial PPA GF is a glass fiber-reinforced composite filament material based
on PPA (polyphthalamide or high-performance / High-Temperature Nylon).
3DXtech Obsidian PA6+GF Red (Onyx Alternative), 1.75mm, 1kg spool
Equivalent to 800cm³, 1kg Obsidian™-GF is a Glass Fiber reinforced PA6 that was formulated to print using stock Onyx™ settings. This is an excellent drop-in replacement for Markforged Onyx™ that offers many much-awaited colors in an engineering-grade material.
Raise 3D Industrial PPA CF - 1.75mm - Black - 1kg Spool
Raise3D Industrial PPA CF is a carbon fiber-reinforced composite filament material based
on PPA (polyphthalamide or high-performance / high-temperature Nylon).
Raise HyperCore filament concentrates most of the fibres in the centre of the filament to allow higher speed printing, while increasing layer adhesion and giving a great surface finish.
Raise3D Industrial PET GF is a glass fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed glass fibers enhance the rigidity, strength, heat, and chemical resistance of PET matrix.
Raise3D Industrial PET GF is a glass fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed glass fibers enhance the rigidity, strength, heat, and chemical resistance of PET matrix.
Raise3D Industrial PET GF is a glass fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed glass fibers enhance the rigidity, strength, heat, and chemical resistance of PET matrix.
Raise3D Industrial PET GF is a glass fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed glass fibers enhance the rigidity, strength, heat, and chemical resistance of PET matrix.
Ultrafuse PP GF30 is polypropylene reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of FFF 3D-printers with tough nozzles.
Ultrafuse PP GF30 is polypropylene reinforced with 30% glass fiber content. The fibers in this compound are specially designed for 3D-printing filaments and are compatible with a wide range of FFF 3D-printers with tough nozzles.
LC Magna Vat Film x 5 (+ 5 Vat Gaskets & 2 Blow Peel Gaskets)
This pack contains five sheets of 100 micron FEP film, cut to the correct size for your Liquid Crystal Magna vat.
PLUS 5 vat gaskets and 2 blow peel gaskets
PolyMaker Glass Fibre PA6 Nylon, Grey, 1.75mm, 150g Sample - UNTIL SOLD OUT
this is a sample coil of 150g only, so you can try a few prints before investing in a 2kg spool.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
PolyMide™ PA6-GF is a glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Raise 3D Raise3D Industrial PA12 CF Support Filament is a break-away support material specially developed for carbon fiber-reinforced composite materials.
The potential of high-impact PCTG inspired Spectrum to develop another composite based on this copolyester – Spectrum PCTG GF10. The use of glass fibre filling has resulted in a high-strength filament with an intriguingly matt surface.
Part of the Spectrum industrial Range, PET-G FX 120 is a flexible material designed especially for engineering applications. This filament is an engineering material which demonstrates excellent durability and strength.
Part of the Spectrum industrial Range, PET-G FX 120 is a flexible material designed especially for engineering applications. This filament is an engineering material which demonstrates excellent durability and strength.