Large chamber volume

The Cure M+ takes the full LC Dental platform eliminating the need to remove printed parts beforehand.

Time regulated control

Digital timer control, set your time and leave your prints to cure.

Strong Parts with peak properties

15-20 minutes your printed parts will be dry and strong with material properties at their full potential.

IMPORTANT: please read specs re compatibility with Opus full size prints

Next > More Information

Dimensions:
External: 390 (H) x 440 (D) x 440 (W) mm
Internal: 350 (H) x 270 (D) x 260 (W) mm

IMPORTANT: The opus platform stands on a 90mm tall bracket at the base of this unit during cure (see image 3). When in use with the platform max Z height of print can only be 185mm. To cure larger objects they would need to first come off platform.

System: User Interface
Display: Thermostat and digital timer control
Light Source: UV Led 100pcs 405nm wavelength
Power Source: Input: 110-240V
Heating: 0-65°C
Drying Time: 15-120 minutes



Update 15 December 2021
Since the time of purchasing from Photocentric your Wash Unit (15Lt) and Cure M+ customer in use experience have resulted in updates to the descriptions/specifications on these products as follows.

Wash 15: to use the wash with prints still on the OPUS platform you require a Bracket and lid that Photocentric now sell separately. We are seeking clarification on the impact on the max z height of your print as a result. If you submerge the platform (with prints pointing upwards, we believe the max height may only be 150mm, and will clarify asap.

Cure M+ : The internal size supplied assumes you are curing off the platform. If you use the platform bracket and cure on the Optus platform you reduce usable space by 90mm. As a result you can not cure items produced at the max height of the opus.

In conclusion: Opus print - to Wash 15 - to Cure M+ workflow was tested by Photocentric through company case studies that did not utilising the full print height of the Opus. This workflow is still valid and workable in those scenarios however it is apparent that where Z height of build exceeds 150mm this workflow needs to be adjusted to suit. We apologise for this and are examining the issue.



Product Dimensions: 570x520x480


Next >

Bilby 3D provides a 12 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket