This complete hotend kit from RepRap discount includes; nozzle, heater block, barrel/heat barrier, fined heat sink, heater cartridge, thermistor, fan, mount and more in a plastic case
FeaturesSpecsSupport
This hotend kit from RepRap discount includes:
- The hotend (nozzle, heater block, barrel/heat barrier, fined heat sink.
- 0.4mm nozzle - Thread M6 and 6mm long
- Machined aluminium groove mount mounting plate
- 12v 30W Heater Cartridge
- EPCOS B57560G104F NTC Thermistor with lead and connector
- 12v Fan brushless fan with short lead
- Allen Key and set screws
- 4 + 4.5mm spanner (matches flat on barrel/heat carrier)
- In plastic case
Next >
Nozzle
0.4mm nozzle - Thread M6 and 6mm long
Metal / Abrasive Filaments
You should upgrade the supplied brass nozzle to a TC (tough coat) nozzle before printing abrasives, as they will wear out the hole to a larger size relatively quickly
These metal fittings are used for holding pneumatic (compressed air) tube. Designed for tube with a 4mm diameter made of Nylon or PU (PolyUrethane), they also work better than anything else we have found with PTFE tubing, which is very hard to hold due to its low friction. Has plastic collar - push down to release.
Buy Now
Bulldog Lite Extruder - 1.75mm - Until Sold Out
This tough little extruder includes everything you need to take filament from you spool through to pushing it into your hotend
Buy Now
Bulldog XL Extruder - 1.75mm - Until Sold Out
This tough extruder includes a greabox for extra filament feeding torque as well as everything you need to take filament from you spool through to pushing it into your hotend.
This is LulzBot / Hexagon hotend style nozzle. With M6 thread for 1.75mm Filament or PTFE Tube
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
