This tough extruder includes a greabox for extra filament feeding torque as well as everything you need to take filament from you spool through to pushing it into your hotend.
FeaturesSpecsSupport
The design is symmetrical so it can bed left or right mounted just by changing around 1 brass plug
Has a recess for holding any standard RepRap Groove Mount hotend (J-Head, E3D, Merlin, Magma, Prusa Nozzle hotends), but designed specifically to work with our Hexagon Hot End - it even includes a fan in the mounting to blow air onto the barrel/thermal barrier fins.
The filament drive mechanism is machined from aluminium with a brass drive gear and roller bearing pressure system with springs and grub screws for adjustment
Includes a PTFE feeder tube and hose fitting, so it can be used in a bowden tube filament drive setup.
Includes set of 5 Allen keys and a 5 peice cleaning brush set
NOTE: Designed for 1.75mm filament only. To run 3mm filament, you would have to drill out a brass plug and replace the PTFE feeder tube and hose fitting
This complete hotend kit from RepRap discount includes; nozzle, heater block, barrel/heat barrier, fined heat sink, heater cartridge, thermistor, fan, mount and more in a plastic case
Buy Now
Push-In Hose Fitting - for 4mm tube, M6 Thread
These metal fittings are used for holding pneumatic (compressed air) tube. Designed for tube with a 4mm diameter made of Nylon or PU (PolyUrethane), they also work better than anything else we have found with PTFE tubing, which is very hard to hold due to its low friction. Has plastic collar - push down to release.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
