Prices + Stock updated 23 Aug @ 18:05
ABS Filament - 2.85mm - Light Blue - 1kg spool
Bilby3D ABS light blue filament in 3mm diameter
Features
Specs
Support
This filament has been extensively tested and works well with standard ABS settings.
ABS (Acrylonitrile Butadiene Styrene) is a standard Engineering plastic such as used in car bumpers and helmets. It is known for not being as brittle as PLA, but not as flexiable than PET filament.
It has the drawbacks of a higher shrinkage rate than PLA (can lead to prints curling or splitting in extreme cases) and generally requiring a heated bed on your 3D printer.
We have tested this on over several different types of 3mm extruding machines with cold or heated beds such as Ultimakers, Creatbot, Mankati and many more.
Next >
More Information
Diameter: 3mm (+/- 0.2mm)
Melting Point: 210 - 250 degC
Soften Point: TBA expected at 90 - 100 degrees
Abrasive: No
Build Surface: Hot bed (90-110°C;) on Kapton Tape or Buildtak. Glass with Gluestick
SPOOL SIZE
Type : Plastic
Inner hole: 5.2cm
Outer diameter: 20cm.
Width: 6.5cm
PACKAGING
Vacuumed in heavy weight clear plastic, then boxed.
Product Dimensions: 200x200x65mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
Material Safety Data Sheet
This product is in the categories:
Related Products:
Buy Now
ABS Filament - 2.85mm - Yellow - 1kg Spool
This ABS is 3mm in diameter on a 1KG spool and a bright yellow in color. The spool has a 5.2cm hole and is compatible with most 3D Printers
Buy Now
ABS Filament - 2.85mm - Green - 1kg Spool
This ABS is 2.85mm in diameter on a 1kg spool and a bright green in color.
Buy Now
ABS Filament - 2.85mm Black - 1kg Spool
This black filament is for 2.85mm extrusion and has a Melting point 190-240°C. It comes on our new plastic spools which are 20cm wide with an inner hole of 5.2cm and stand 8cm tall.
Buy Now
ABS Filament - 2.85mm - Red - 1kg Spool
This Bilby3D ABS filament is red.
Buy Now
ABS Filament - 2.85mm - White - 1kg Spool
It white filament is a bright white (not creamy). It comes on our new plastic spools which are 20cm wide with an inner hole of 5.2cm and stand 8cm tall.
It is for 2.85mm Extruders
Melting Point 210-240 degC
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15