Support Material Dissolvable in water, Limonene and other solvents, the right materials cn save a lot of time in support removal and leave your print quality looking the best
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to ABS, PET and PLA
More
Raise3D Premium PVA PLUS Support Material - 1.75mm - Natural - 750g
Raise3D Premium PVA+ is a polyvinyl alcohol (PVA)-based cold water-soluble support filament for FFF 3D printing with dual extruders.
*Note- Not detectable In optical filament sensors as on Raise 3d Printers More
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to ABS, PET and PLA
More
BASF UltraFuse Support - 1.75mm For Metal Filament - 300g
Ultrafuse® Support Layer filament developed to be used in combination with Ultrafuse® Metal Filaments.
When printed between support and the object, it creates a barrier during sintering and facilitates the separation of support from the metal part. Ultrafuse® Support Layer is not developed to print stand-alone parts and should be printed as a layer attached to the support structures in dual extrusion prints. More
PolySupport™ works just like your regular 3D printing filaments. Easy to print and store. No sensitivity to normal moisture or heat and no need to work with dangerous organic solvents. More
PolySupport™ works just like your regular 3D printing filaments. Easy to print and store. No sensitivity to normal moisture or heat and no need to work with dangerous organic solvents. More
PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
We recommend that this material be used with the PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results. More
PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility. More
3DXTech Thermax High-Temp Support Material - 1.75mm - Natural- 500g
HTS high-temp break-away support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials. ThermaX™ HTS High-Temp Support can be used as a break-away support with:
- PEKK + PEEK
- Ultem PEI
- PPSU
- PSU
- PPS
3DXTech AquaTek X1 Support Material - 1.75mm - Natural - 500g
AquaTek™ X1 Universal Water Soluble Support Filament
AquaTek™ X1 is an all-new advanced universal water soluble support material formulated specifically for printing complex parts.
AquaTek™ X1 is readily water soluble in warm water with excellent adhesion to the broadest range of materials - including popular advanced composite materials CarbonX™ Carbon Fiber Nylon and AmideX™ Glass Fiber Nylon. More
BASF UltraFuse BVOH Dissolvable Support - 2.85mm - 350g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to ABS, PET and PLA
More
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to ABS, PET and PLA More
BASF UltraFuse Support - 2.85mm For Metal Filament - 300g
Ultrafuse® Support Layer filament developed to be used in combination with Ultrafuse® Metal Filaments.
When printed between support and the object, it creates a barrier during sintering and facilitates the separation of support from the metal part. Ultrafuse® Support Layer is not developed to print stand-alone parts and should be printed as a layer attached to the support structures in dual extrusion prints. More
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to ABS, PET and PLA
More
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
