Mingda Raptor 450 - IDEX 3D Printer

120°C - Actively Heated Chamber

Professional Temperature Control · Ensures More Stable High-Temperature Material Printing

500°C - Ultra-High-Temperature Nozzle

Compatible with a Broader Selection of High-Performance Materials

130°C - High-Temperature Heated Bed

Stronger Adhesion for More Stable Printing

IDEX - Twin Independant Extruders

For higher throughput or dual material prints without purging
• Duplicate Mode - Print 2 of the same object at the same time, doubling output
• Mirror Mode - Print a left a right version of the same model at the same time
• Support Mode - Print material with snap-off or dissolvable support materials without purge waste
• Dual Color Model - Print 2 different colours at the same time, or hard and flexible in the same print

High-Efficiency Production

After being connected via WiFi or network cable, can be remotely printed and monitored in real time.
At the same time, it also supports multi machine control, facilitating rapid mass production.
Can also be run offline from USD drives without losing any functions as the Ai is all onboard.

Wide Material Compatability

Prints with a wide variety of filaments, and is open materials so you can setup other brands of filament.
• ASA Excellent UV and weather resistance, anti-aging properties, mechanical performance similar to ABS but superior outdoor durability
• ABS High strength, easy post-processing (sanding/painting), low cost, resistant to mild chemical exposure.
• PA Nylons High toughness, self-lubricating and wear-resistant, lightweight, can be carbon-fiber reinforced for increased rigidity.
• PC High impact resistance, optical clarity, flame-retardant options, good dimensional stability.
• PEEK Excellent chemical resistance, metal-like mechanical strength with a higher strength-to-weight ratio than Aluminium. For full-sized parts, we recommend upgrading to the Raptor450HT


Next > More Information

High Temperature, Dual Independant, Water Cooled Extruders

Bringing a never seen before level of features and functionality to this price bracket.

Build Volume: 450 x 450 x 500mm (L x W x H)
Build Volume - Copy Mode: 450(2x225) x 450 x 500mm (L x W x H)
Build Volume - Mirror Mode: 390(2x195) x 450 x 500mm (L x W x H)
Max. Printing Speed: 600 mm/s
Max. Extruder Temperature: 500°C
Max. Bed Temperature: 130°C
Max. Chamber Temperature: 120°C
Material Cabinet (at rear): 50°C, holds 2pcs 1kg spools
Standard Nozzles Size: 0.4mm (0.6, 0.8mm nozzles available)
Open Materials
Recommended Materials: ABS, ASA, PC, Nylon, PEEK and PEEK-CF
Water Cooled Extruder
Cool air supply for model cooling
HEPA Filter
AI print monitoring
RFID Filament reading
Electromagnetic Door Locks
Power: Single Phase ~3200W. Will require 15amp socket
Machine Dimensions: 877 x 799 x 1262 mm (L x W x H)
Compatible with the MD-F01 Filament Drying and Feeding Cabinet




Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 5 or more machines at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.