Raise 3D have gone back to the drawing board to design a smaller format 3D printer, with a focus on educational as well as industrial use.

It has great new features:
- Industry first onscreen videos and nozzle offset calibration
- Updated 7inch tablet interface with Power saving button
- All new mechanical systems
- Magnetic Flex Bed, for easy print removal
- IDEX - independent dual extruders
Mirror Mode: Produce 3D models and their inverse simultaneously, increasing productivity and reducing print time
Duplication Mode: Use both extruders in synchronised printing, doubling production capabilities

- Power loss recovery
- Filament runout sensors
- Remote video monitoring (and Print Farm management via Raise Cloud)
- HEPA + Carbon Air Filtration

Prints a wide range of materials - it allows any brand filament to be used. A wide range of filament profiles can be easily added to the ideaMaker software for a link to the Raise3D website.
PLA, PETG, ABS, ASA, PC, PA6-12 (Nylon), TPU (Flexible), PCTG, a range of support materials and more Bilby3D stocks toughened nozzles to print Carbon Fibre reliably over a prolonged period

Next >

- Machine Size: Width 600mm, Depth 600mm, Height 471mm counter to top + handle = ~490mm.
- Operating Space: The side doors open, and the top lid raises for maintenance. Total operating space is W 1060mm D 690mm H896mm
- Build Volume (Single Extruder Print): 330 x 240 x 240mm (WxDxH)
- Build Volume (Dual Extruder Print): 295 x 240 x 240mm (WxDxH)
- Print Head Travel Speed: 30 - 150mm/s
- Layer Heights: 0.02 - 0.25mm
- Maximum Exstrusion Temperature: 300 °C
- Filament Diameter: 1.75mm
- Raise V3 Hotend
Note: This machine uses the same nozzles as the Raise Pro 2/Pro 2 Plus, so you can upgrade to a toughened nozzle
- Print Bed: Heated with BuildTak on magnetic flexible steel bed
- Maximum Bed Temperature: 110 °C
- Bed Levelling: Mesh-Levelling with Flatness Detection
- XY Step Size: 0.78125 microns
- Z Step Size: 0.078125 microns
- Filament runout sensors
- Connectivity: Wi-Fi 2.4/5g, LAN, USB port, Live Camera
- Filter: HEPA with activated Charcoal
- Machine Size: 607 x 596 x 465mm (WxDxH)
- Power Input: 100-240V AC, 50/60Hz, 230V @ 2A
- Power Supply Output: 24V DC, 350W

Software

- Provided Software: ideaMaker (Free dowload)
- Supported File Types: STL / OBJ / 3MF
- Machine code type: GCODE

Print Controller

- Interface: 7-inch Touchscreen
- Netwrok: Wi-Fi, Ethernet
- Resume Print after Power Outage: Firmware recording, no need for battery installation
- Screen Resolution: 1024 x 600 pixels
- Motion Controller: Atmel ARM Cortex-M4 120MHz FPU
- Login Controller: NXP ARM Cortex-A9 Quad 1GHz
- Memory: 1 GB
- Onboard Flash: 8 Gb
- OS: Embedded Linux
- Ports: USB 2.0 x 2 (1 x Host), Enthernet x 1

Product Dimensions: 607 x 596 x 490mm


Next >

Bilby 3D provides a 12 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket

10% Bulk Discount available; Order 5 or more machines at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.