ABS Filament - 1.75mm - Gloss Yellow - 1kg Spool

This filament has been extensively tested and works well with standard ABS settings.
ABS (Acrylonitrile Butadiene Styrene) is a standard Engineering plastic such as used in car bumpers and helmets. It is known for not being as brittle as PLA, but not as flexible than PET filament.
It has the drawbacks of a higher shrinkage rate than PLA (can lead to prints curling or splitting in extreme cases) and generally requiring a heated bed on your 3D printer.

We have tested this on over 10 different types of 1.75mm extruding machines with heated beds such as Makerbot, Ultimaker, Bambu, Creality FlashForge, Mingda, UP, and many more.

Applications

• Specifically designed for FDM 3D printing applications
• Suitable for most FDM printers on the market
• Offers excellent melt flow stability and part mechanical strength
• Provides strong thermal and mechanical performance in printed parts


Next > More Information

Recommended Print Settings

• Diameter: 1.75mm (+/- 0.2mm)
• Melting Point: 220 - 250 degC
• Soften Point: 80 - 120 degrees
• Abrasive: No
• Build Surface: Hot bed (90-110°C;) on Kapton Tape or Buildtak. Glass with Gluestick

SPOOL SIZE

• Type : Plastic
• Inner hole: 5.2cm
• Outer diameter: 20cm.
• Width: 6.5cm

PACKAGING

• Vacuumed in heavy weight clear plastic, then boxed.

Physical Properties

• Density: 1.05 g/cm³ (ISO 1183, 23 °C)
• Melt Flow Rate: 18.9 g/10 min (ISO 1133, 220 °C, 10 kg)
• Mold Shrinkage: 0.4 – 0.7 % (ISO 294-4)
• Linear Expansion Coefficient: 8.6 × 10?5 (ISO 11359)

Mechanical Properties

• Tensile Strength (yield): 47 MPa (ISO 527, 50 mm/min)
• Tensile Strength (break): 34 MPa (ISO 527, 50 mm/min)
• Tensile Elongation (break): 30 % (ISO 527, 50 mm/min)
• Flexural Strength: 76 MPa (ISO 178, 2 mm/min)
• Flexural Modulus: 2.2 GPa (ISO 178)
• Impact Strength, Izod Notched:
19 kJ/m² at 23 °C (ISO 180/1A)
9 kJ/m² at –30 °C (ISO 180/1A)

Thermal Properties

• Vicat Softening Temperature (ISO 306):
104 °C (1 kg, 50 °C/hr)
100 °C (5 kg, 50 °C/hr)
• Heat Deflection Temperature (ISO 75/A):
83 °C at 1.8 MPa (unannealed)
98 °C at 1.8 MPa (annealed)

Flammability

• UL-94 Rating: HB (1.5 mm thickness)


Product Dimensions: 200 x 200 x 65mm


Next >

RoHS Compliant - According to RoHS (recast): Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, 2011/65/EU last amended by (Eu) 2015/863This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet