Print metal parts on a standard FFF printer with toughened nozzle.
3 part process in brief: 1. Printing with overscaling to allow for shrinkage, producing a green part
2. Catalytic de-binding to produce the brown part
3. Sintering in a pure hydrogen atmosphere to produce a white part, ready for any post-processing
Read the full guide here
Example Applications:
- Metal jigs and fixtures
- Series Production
- Functional Parts nad Protoptypes
- Tooling


Next >

Recommended 3D-Print processing parameters:
- Nozzle Temperature: 230 – 250 °C
- Build Chamber Temperature: Not required
- Bed Temperature 90 – 120 °C
- Bed material Glass + approved glues* / polyimide tape (*Dimafix® suggested)
- Nozzle Diameter: 0.4 mm
- Print Speed 15 – 50 mm/s

Filament Properties:
- Tolerance: ± 0.075 mm
- Roundness: ± 0.075 mm
- Bending Radius: 10 ± 3 mm
- Length per spool: 100m
- Weight per spool: 3kg
- No drying required under normal conditions

General Parameters
- Printed Part density: 7.85 kg/m³ density values obtained from tensile and fracture test samples, under ISO 1183-1
See the TDS for Strength, Elongation and Hardness specifications.

Product Dimensions: 215x220x70


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet

Technical Data Sheet