Spectrum Nylon, PA6 + Glass Beads, 1.75mm, 1kg Spool - UNTIL SOLD OUT
Poliamide filled with glass micro-spheres
Nylon PA6 GK10 is a new, high-temperature PA6-based construction material in the natural colour. Perfect for 3D printing. Filled with glass beads, it is more flexible than the polyamide the material is based on. Its specific quality is a low impact of moisture and temperature on the measurements or electrical properties as compared to PA66. In addition, Nylon PA6 GK10 features a low linear shrinkage (up to 0.3-0.5%) and a relatively high working temperature (160oC).
FeaturesSpecsSupport
Key features
Low processing (linear) shrinkage of 0.3-0,5%
High temperature and abrasion resistance
Easy separation of the object from the bed
High mechanical strength
Chemical resistance to lubricants and oils
Wide range of applications
Very robust lamination of layer
Good impact resistance
Wide temperature range for prolonged operation as well as a very high temperature up to 160°C for short-time operation
Relatively high resistance to thermal ageing
Applications
End-use parts
Tooling
Functional prototyping
Industrial modelling
Production of slide bearings, gear wheels and racks, sweep-off gears and guide rolls operated in elevated temperatures up to 120°C on a prolonged basis and up to 160°C on a short-time basis
All types of ring and plate seals with an increased chemical and corrosion resistance
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
