Next >

Recommended Print Settings
- Nozzle Size: 0.4mm
- Nozzle Temperature: 230 - 240 °C
- Bed Temperature: 80 °C
- Build Surface: Glass, BuildTak or similar
- Cooling Fan: Turned on
- Printing Speed: 45 mm/s
- Raft separation distancce: 0.14 mm
- Retraction Distance: 1-3mm
- Retraction Speed: 20-80 mm/s
- Recommended Chamber Temperature: Room Temperature
- Overhang Threshold Angle: 70 °
- Recommended Support Material: PVA

Physical Properties

Property	Testing Method	typical Value
Density	ASTM D792 (ISO 1183, GB/T 1033)	1.25 (g/cm3 at 21.5°C)
Glass transition temperature	DSC, 10 °C/min	81 °C
Vicat Softening temperature	ASTM D1525 (ISO 306 GB/T 1633)	84 °C
Melt index	220 °C, 2.16 kg	3.9 (g/10 min)
Melt index	240 °C, 2.16 kg	10.8 (g/10 min)
Decomposition temperature	TGA, 20 °C/min	129- 132 °C

Tested with 3D printed specimen of 100% infill

Mechanical Properties
PropertyTesting Methodtypical Value Young’s modulus (X-Y) ASTM D638 (ISO 527, GB/T 1040) 1472 ± 270 MPa Tensile strength (X-Y) ASTM D638 (ISO 527, GB/T 1040) 31.9 ± 1.1 MPa Elongation at break (X-Y) ASTM D638 (ISO 527, GB/T 1040) 6.8 ± 0.9 % Bending modulusASTM D790 (ISO 178, GB/T 9341) 1174 ± 64 MPa Bending strengthASTM D790 (ISO 178, GB/T 9341) 53.7 ± 2.4 MPa Charpy impact strength ASTM D790 (ISO 178, GB/T 9341) 5.1 ± 0.3 kJ/m2
All testing specimens were printed under the following conditions:
Nozzle temperature = 240 °C, Printing Speed = 45 mm/s, Build Plate Temperature = 80 °C, Infill = 100%
All specimens were conditioned at room temperature for 24h prior to testing

Product Dimensions: 200 x 200 x 70mm


Next >