• Made of biodegradable raw materials
• Good mechanical properties (high hardness and tensile resistance)
• User friendly
• High aesthetic surface quality
• Good for creating high-resolution parts
• Relatively low melting point
• No shrinkage after cooling
• Good for lost casting methods to create metal parts
• Wide range of available colors

The characteristics of the filament Spectrum Premium PLA determine its application as a training material for those who learn to employ the FDM/FFF additive manufacturing technologies. Moreover, on account of the extremely high aesthetic properties, the material is widely used in industrial design, specifically for concept and demo prototyping of designed finished and semi-finished products.

The material is also widely used for producing gadgets and company advertising aids as well as all kinds of toys, figurines, containers, handles and stands for interior design purposes.

Packaging: Filament is reeled on the neat, transparent spool. Each spool contains information on the type of material, diameter and recommended printing temperature. Filament is vacuum-packed with a moisture absorber. Instruction manual inside. Whole product packed in the original, folied Spectrum Filaments packaging.

Next >

Recommended Settings:
• Extrusion Temperature: 185-230 °C
• Bed Temperature: 0-45 °C (Not Required)
• Active Cooling Fan: ON - upto 100%
• Printing Speed: 40-150 mm/s

Specifications (See TDS for full details):
• Diameter: 1.75 ± 0.05mm
• Heat Distrotion Temperature: 55 °C
• Specific Gravity: 1.24 g/cc
• Tensile Strength (XY): 23.8 MPa
• Tensile Strength (Z): 16.2 MPa
• Charpy Impact Test: 1.7(XY) to 4.61 (Z) H/cm3
• Flexural Modulus: 1490(Z) to 2157(XY) MPa

Spool Dimensions:
• Outer Diameter: 200mm
• Spool Width: 67mm
• Hole Diameter: 54mm


Product Dimensions: 200Ø x 67mm


Next >

Spectrum PLA prints best at lower temperatures then other PLA. Generally 10-20 degrees lower than you were printing Bilby 3D PLA. Here you see 240 for the lower section, 200 for the last 10mm
See image 3 for the difference between these temperatures
Bilby 3D provides a 6 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket
Material Safety Data Sheet

Technical Data Sheet