PolyMide™ is a family of Nylon/polyamide based filaments. Produced with Polymaker’s Warp-Free™ technology, PolyMide™ filaments deliver engineering properties intrinsic to Nylon and ease of printing. PolyMide™ CoPA is based on a copolymer of Nylon 6 and Nylon 6,6. The filament combines excellent strength, toughness, and heat resistance of up to 180°C.
FeaturesSpecsSupport
PolyMide™ CoPA features Polymakers Warp-Free™ technology:
Warp-Free™ - Warp-Free™ technology enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.
Features
Excellent Toughness - The outstanding mechanical strength and toughness makes PolyMide™ CoPA an excellent choice for engineering based applications. Excellent heat resistance - With a high softening temperature of ~180 °C, PolyMide™ CoPA is one of the most heat resistant 3D printing materials in the market. Improved printability – Unlike many Nylon filaments, PolyMide™ CoPA is extremely easy to work with exhibiting excellent dimensional stability. It is compatible with most filament-based 3D printers with no heated bed or chamber required! Quality Control - With Polymakers eight step quality control process and rigorous in-house testing, you can rest assured that PolyMax™ PC will produce beautiful, reliable and accurate printed parts every time.
We have tested this repeatedly on our Inventor2 Special Edition (cold bed) and found it works best at 240 Degrees extrusion at 70% speed.
Next >
PRINT SETTINGS
- Nozzle Temperature: 250°C – 270°C
- Printing Speed: 30mm/s – 50mm/s
- Bed Temperature: 25°C – 50°C
- Bed Surface: Glass with glue
- Cooling Fan: OFF
Based on 0.4 mm nozzle and Simplify 3D v.3.1. Printing conditions may vary with different printers and nozzle diameters
NOTES
- Drying Settings: 80°C for 12h
- Recommended Support Materials: PolyDissolve™ S1
Other:
It is highly recommended to use the PolyBox™ when printing with PolyMide™ CoPA and to store it in the resealable bag.
To ensure a good heat resistance of your printed part it is recommended to anneal your PolyMide™ CoPA 3d printed model.
Annealing settings: 70°C for 2h
Product Dimensions: 200Ø x 50mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Material Safety Data Sheet
Ultrafuse PA is specially developed for FFF printing and based on BASF´s polyamide portfolio known as Ultramid®
Buy Now
Spectrum Nylon, PA6 Low Warp, 1.75mm, 500g Spool
Polyamide PA6 (Nylon) is an extremely durable, technical material. Parts printed from Nylon have not only a high resistance to abrasion, but also a high temperature resistance. In addition, polyamide PA6 is characterized by good insulating properties, chemical resistance to greases, oils and high mechanical strength. The above features make it applicable to print functional parts, including slide bearings, gearwheels or guideways. Nylon PA6 filament is very sensitive to moisture. In order to obtain the best performance of the printed object, it is recommended to dry the material carefully before printing. Spectrum Filaments PA6 as one of the few is also characterized by very low shrinkage of approx. 0.3%.
Buy Now
Spectrum Nylon, PA6 Low Warp, 1.75mm, 1kg Spool
Polyamide PA6 (Nylon) is an extremely durable, technical material. Parts printed from Nylon have not only a high resistance to abrasion, but also a high temperature resistance. In addition, polyamide PA6 is characterized by good insulating properties, chemical resistance to greases, oils and high mechanical strength. The above features make it applicable to print functional parts, including slide bearings, gearwheels or guideways. Nylon PA6 filament is very sensitive to moisture. In order to obtain the best performance of the printed object, it is recommended to dry the material carefully before printing. Spectrum Filaments PA6 as one of the few is also characterized by very low shrinkage of approx. 0.3%.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
