For creating highly accurate jewellery parts for investment casting, use Photocentric Cast resin.
Printed parts display high accuracy and detail which shows in the smooth, crisp finish on the cast parts.
FeaturesSpecsSupport
Virtually no ash or residue, no expansion, and highly detailed parts can be obtained using Cast.
Tensile Modulus*: 1380 MPa under ASTM D638
Tensile Strength*: 19.5 MPa under ASTM D638
Elongation at break*: 2-3% under ASTM D638
Flexural Properties
Flexural Strength*: 22 MPa under ASTM D792
Flexural Modulus*: 632 MPa under ASTM D792
Impact Properties
Impact Strength Notched Izod*: 1.2 kJ/m2 under ISO 180
General Properties
Hardness*: 75 Shore D under ASTM D2240
Viscosity: 630 cPs at 25°C Brookfield spindle 3
Density: 1.20 g/cm3
Storage: 10 - 50°C
* Post cured for 1hr at 60°C in Cure L2
Product Dimensions: 280 x 90 x 80 mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Material Safety Data Sheet
Dental Model photopolymer resins have been formulated to create detailed, high resolution dental models on the LC Dental 3D printer
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
