Ultracur3D® RG 1100 by Forward AM is a high-strength polyurethane-based engineering grade resin with mechanical properties comparable to widely spread injection molding grades used in automotive or other demanding industries. Due to its high heat deflection temperature (HDT 116°C), its good chemical resistance and long-term UV-stability this material is perfectly suitable for applications such as automotive connectors, demanding engineering parts, exterior covers, brackets and housings.

Benefits at a Glance

• Very high stiffness
• Impressive all-round temperature resistance
• Very high chemical resistance and low water uptake

Example Applications

• Automotive connectors
• Demanding engineering parts
• Exterior covers
• Brackets and housings

Material Properties

• Young’s modulus: 3080 MPa
• Tensile strength: 70 MPa
• Heat deflection temperature: 116 °C
• Water absorption (24h): 0.32 %


Next > More Information

Fully validated and print-ready on:
• Asiga® - MAX X43, MAX X35, MAX X27. MAX UV, PRO 4K, 45, PRO 4K 65, PRO 4K 80
• atum3D® - DLP STATION 5 EXZ* (405 nm)
• MiiCraft - Ultra 125 Y (385 nm)
• MiiCraft - Ultra 125 Y (405 nm)
• RapidShape® – I30+
• Stratasys® – Origin® One

Preliminary Validation on:
• Genera® - G2, F2
• UnionTech® – Cute 300, Cute 380, Pi 200, E 140

Stratasys Origin One, BASF Recommendations:
• Layer Thickness: 100µm
• Irradiance 5 mW/cm²
• Exposure Time: 2s
• Wash Cycle 1: 3min in Ultracur3D Cleaner in Ultrasonic mode
• Wash Cycle 2: 3min in IPA in Ultrasonic mode
• Wait before post-processing: 30min at 40°C
• Post Curing: 10min under Dymax ECE 2000 spotlight, flip and repeat

Product Dimensions: 90 x 90 x 220mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Technical Data Sheet