Prices + Stock updated 9 Mar @ 13:04
Ecoworks Dissolving Support Cleaning Additive (24 Pack)
Faster effective support removal, for any water soluble filament
Features
Specs
Support
The Ecoworks™ cleaning agent is designed to remove SR-30 support material from parts built using the FDM process with soluble support material. The cleaning agent is both user- and eco-friendly (with a pH of 9.8). Ecoworks comes in tablet or packet form and usage varies by tank type. The Ecoworks™ cleaning agent requires a compatible wash tank (stainless steel).
This case includes 24 packets, each packet with an A and B side. The A side has 3 pods, the B side has 2 pods.
Dissolve all A and B pods for one full packet of Ecoworks solution. One full packet should be used for every 2 gallons (7.5 liters) of water.
Next >
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
Stratasys SR-30 Support Material, White, 450g
Stratasys® SR-30
Dissolvable support material from Stratasys for Makerbot MethodX
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 2kg Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to PLA and PET
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 750g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility increases with water temperature. It offers great compatibility to a variety of materials.
Good adhesion to PLA and PET, can work with ABS and Nylon depending on your setup
Buy Now
ForwardAM UltraFuse BVOH Dissolvable Support - 1.75mm - Natural - 350g Spool
Printing complex designs may only be possible with temporary support structures. Ultrafuse® BVOH water-soluble support filament has been designed to easily dissolve in water. The solubility is increasing with higher water temperature. It offers great compatibility to a variety of materials. Store this monofilament in a sealed bag or container to prevent moisture uptake.
Good adhesion to PLA and PET, can work with ABS and Nylon depending on your setup
Buy Now
Makerbot PVA for Method - 1.75mm - Natural - 450g
Water soluble support material for complex parts
Buy Now
Raise3D Premium PVA PLUS Support Material - 1.75mm - Natural - 750g
Raise3D Premium PVA+ is a polyvinyl alcohol (PVA)-based cold water-soluble support filament for FFF 3D printing with dual extruders.
*Note- Not detectable In optical filament sensors as on Raise 3d Printers
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
