Creality K2 PLUS (basic)

• 350 x 350 x 350mm Build Volume
• 600mm/s Speed
• Max Nozzle Temp: 350 °C
• Apus Direct Drive Extruder
• Tilt Detection
• Sturdy Die-Cast Frame
• FOC Closed-Loop Motors - Quiet and capable of 30,000mm/s² acceleration
• Active Chamber Heater to 60°C
• Internal air circulating fans for even temperature within the camber, and carbon filter to remove VOCs



Next >

• Build Volume: 350 x 350 x 350mm
• Print speed: up to 600mm/s • Acceleration: up to 30,000 mm/s²
• Print Accuracy: 100mm±0.1mm
• Layer Height: 50 - 300 micron
• Extruder: Apus Dual-Gear Direct Drive Extruder
• Filament Diameter: 1.75mm
• Nozzle Diameter: 0.04mm
• Nozzle Max. Temp.: 350°C
• Heatbed Max. Temp.: 120°C
• Camber Max. Temp: 60°C
• Build Plate: Coated Flexible Magnetic Plate
• Levelling Mode: Anti-tilt auto levelling with LiDAR sensing
• Motors: Closed-Loop FOC Servo Motor
• Display: 4.3inch Touch Screen
• Supported Filament: PLA, ABS, PETG, PA-CF, PETG-CF and more
• AI Camera: Monitoring and Calibration
• Filament Management: Run-out sensor, filament backup, tangle sensor
• Filtration: Air-Filter
• Connectivitiy: USB Drive, Ethernet, WiFi
• Software: CrealityPrint 5.0, G-Code

Machine

• Machine Dimensions: 495 x 515 x 640mm
• Machine + Combo: 495 x 515 x 916mm
• Machine Weight: 34kg
• Rated Voltage: 100-240 V AC 50/60Hz
• Rated Power: 1200 W

Product Dimensions: 495 x 515 x 916mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product