Prices + Stock updated 23 Aug @ 18:05
Flexible Filament - 1.75mm - Green - 200g Spool - UNTIL SOLD OUT
Bilby3D brand Flexible (Green) - Shore 95 A -1.75mm filament
Features
Specs
Support
Tested on Blue tape and straight on glass (both cold) with excellet adhesion.
Next >
More Information
- On a mini spool (150 x 32mm. 52mm hole)
- Will spiderweb, so choose model well.
- Turn filament fan off during early layers, then print like you would PLA.
- We recommend raising the print temp. slightly compared to regular PLA and reduce the print speed to around 40mm/s to help the filament to just fall out of the nozzle rather than be pushed by the feeder
- Melting Point 190-250 °C
Product Dimensions: 150 x 32 mm. 52mm hole
Next >
We have printed a lot with this material on the Flashforge Dreamer. Settings and info you may find helpful:
Bed Temp: We heat the bed to 50 degrees, unless twin extruding with ABS see below.
Resolution : 200 - 300 micron
Print Speed: 30 mm/second
Temperature: 230 degrees
Nozzle fan: ON (we use the left extruder on the dreamer and tell the default it is PLA so this turns on.
Two Materials: We have printed Flex-PLA and Flex-ABS Both stick/fuse well together. In both cases we use the plastic as the raft. With ABS we raise the bed temp to 110, however also found the higher heat did effect print quality of the flex (perhaps as the filament fan is also turned off).
General Note: Flex is very susceptible to stringy webs between walls (called spider webbing). Reducing temperature defiantly helps, as does slowing print speed. It is interesting that in the heated chamber of ABS printing this is much less, but the quality of the overall flex print is also more poor.
Bilby 3D provides a 1 month Australian, back-to-base warranty of this product (
Terms and conditions)
For technical support of this product please
read our knowledge bank or
log a ticket10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
Material Safety Data Sheet
This product is in the categories:
Related Products:
Buy Now
Spectrum S-Flex 90A - 1.75mm - Lime Green - 500g
Spectrum S-Flex 90A is a filament designed for 3D printing which enables you to manufacture flexible items in a much simpler manner than with other materials of this type. The optimised composition of the material provides for good adhesion both between layers and between the printed item and the build platform.
Buy Now
Flexible (rubber like) Filament - 1.75mm - Black - 200g Spool
Bilby3D brand Flexible (Black) - Shore 95 A -1.75mm filament
Buy Now
Flexible Filament - 1.75mm - Yellow - 200g Spool - UNTIL SOLD OUT
Bilby3D brand Flexible (Yellow) 1.75mm filament
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15