Polymaker PC-Max™ offers the absolute best in toughness that is simply unobtainable from other 3D printing materials of similar stiffness. This makes Polymaker PC-Max™ an excellent choice for real-world, engineering applications.
FeaturesSpecsSupport
Polymaker PC-Max™ offers better heat resistance. It can withstand temperatures well above 110 °C.
Polymaker recommends their PolyDissolve S2 as a sopport material.
Next >
- Glass Transition Temp: 113 °C
- Density: 1.18 – 1.20 g/cm3
- Diameter: 1.75 mm
- Tolerance: &plusminus;0.05 mm = 50 Microns (Typical ~ &plusminus; 0.02 mm )
- Recommended printing temperature: 250 – 270 °C (Diameter of 1.75 mm)
- Recommended printing speed: 30 – 90 mm/s
- Recommended Heated bed: If equipped set to 80°C
- Recommended Support Material : PolyDissolve S2
- Build platform - Polymaker PC-Max bonds really well with BuildTak
- Spool OD = 270mm
- Spool ID = 54mm
- Spool Width = 100mm
Product Dimensions: 200 x 200 x 50mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Material Safety Data Sheet
Polymaker PC-Max™ offers the absolute best in toughness that is simply unobtainable from other 3D printing materials of similar stiffness. This makes Polymaker PC-Max™ an excellent choice for real-world, engineering applications.
Buy Now
Raise3D Premium PC Filament - 1.75mm - Black - 1kg Spool
Genuine Raise 3D Premium PolyCarbonate Filament
Buy Now
PolyMaker PC-Max, White, 1.75mm, 3kg
Polymaker PC-Max&tm; offers the absolute best in toughness that is simply unobtainable from other 3D printing materials of similar stiffness. This makes Polymaker PC-Max&tm; an excellent choice for real-world, engineering applications.
Buy Now
PolyMaker PC-Max, White, 1.75mm, 750g
Polymaker PC-Max&tm; offers the absolute best in toughness that is simply unobtainable from other 3D printing materials of similar stiffness. This makes Polymaker PC-Max&tm; an excellent choice for real-world, engineering applications.
Buy Now
Kimya PC-S Filament - 1.75mm - Translucent - 750g Spool
Polycarbonate is a material from the petrochemicals industry. It is already used in traditional manufacturing processes as it has excellent resistance to impact and heat. For 3D printing, it also has the advantage of being extremely robust while remaining accessible.
PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
We recommend that this material be used with the PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
