Prices + Stock updated 9 Mar @ 13:04
Raise3D N2 EndStop Switch- Y Protective cover
This is an upgrade/mod for the Raise 3D Nseries that covers and protects the Y endstop.
Features
Specs
Support
This 3d printed part clips on to the existing endstop to protect it from being bent. Kit is supplied with 2 M3 16mm cap screws required to kit the upgrade. See Support TAB for fitting instructions
Next >
2 pin
Product Dimensions: 26 x 30 x 8mm
Next >
How to Fit the Upgrade
You will need a 2.5mm Hex wrench
Step 1: Turn off the power.
Step 2: Locate the Y endstop at the front left corner of the machine (see image 3) Remove the cables which connected to the end stop and undo the cap screws (there is a cushion plate behind it be ready to catch that.
Step 3: Press the protective plate onto the endstop, then seat over the cusion plate and insert the new (longer) cap screws supplied. Screw the assembly back in place. Connect the cable
Step 4 : Turn on power and test endstop is working by HOMEING the Y axis from the SCREEN menu.This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
