Loctite 3D Pro 4170 Resin - Black - 1 kg

LOCTITE 3D PRO417 offers moderate heat resistance with a heat deflection temperature of 49°C, excellent surface finish, and high green strength for accurate room-temperature printing. Its versatile, compatible with numerous DLP and LCD machines, and is suitable for industries like industrial, automotive, and consumer goods for making manufacturing aids, jigs, fixtures, housings, covers, and insoles.

Designed for use on all open-source SLA and DLP 3D Printers in the range of 385-420nm.
• Moderate heat resistance with HDT of 49°C
• Superior strength and impact resistance
• Compatible with DLP and LCD machines


Next >

Technical Specifications:

• Tensile Stress at Break (MPa): 40
• Youngs Modulus (MPa): 1380
• Elongation at Break (%): 100
• HDT at 0.455 MPa (°C): 49
• IZOD Impact (Notched, J/m): 54
• Shore Hardness (3s): 64

Workflow:

Validated workflows need to be followed to achieve properties as provided in the TDS. Examples of validated workflow steps are listed below. Users should defer to the most current workflow information for the best results which can be found here.

Printer Settings

LOCTITE 3D PRO417 BK is formulated to print optimally on industrial DLP printer. Read the safety data sheet carefully to get details about health and safety instructions. Recommended print parameters:
• Shake resin bottle well before usage
• Temperature: 20°C to 35°C
• Intensity: 3 mW/cm² to 7 mW/cm²

Printer Compatibility:

LOCTITE Resins are designed for use on all open-source SLA and DLP 3D Printers in the range of 385-420nm.

LOCTITE 3D PRO417 has been validated on the following 3D printers:
• RapidShape i50+
• RapidShape i100+




Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product