Prices + Stock updated 9 Mar @ 13:04
Raise3D Premium PETG - 1.75mm - White - 1kg
Genuine Raise 3D Premium PETG - White on a 1kg Spool
Features
Specs
Support
Next >
Recommended Print Settings
- Nozzle Size: 0.4mm
- Nozzle Temperature: 230 - 240 °C
- Bed Temperature: 80 °C
- Build Surface: Glass, BuildTak or similar
- Cooling Fan: Turned on
- Printing Speed: 45 mm/s
- Raft separation distancce: 0.14 mm
- Retraction Distance: 1-3mm
- Retraction Speed: 20-80 mm/s
- Recommended Chamber Temperature: Room Temperature
- Overhang Threshold Angle: 70 °
- Recommended Support Material: PVA
Physical Properties
| Property | Testing Method | typical Value |
| Density | ASTM D792
(ISO 1183, GB/T 1033)
| 1.25 (g/cm3 at 21.5°C)
|
| Glass transition temperature
| DSC, 10 °C/min | 81 °C |
| Vicat Softening temperature | ASTM D1525
(ISO 306 GB/T
1633) | 84 °C |
| Melt index | 220 °C, 2.16 kg | 3.9 (g/10 min) |
| Melt index | 240 °C, 2.16 kg | 10.8 (g/10 min) |
| Decomposition temperature | TGA, 20 °C/min | 129- 132 °C |
Tested with 3D printed specimen of 100% infill
Mechanical Properties
| Property | Testing Method | typical Value |
| Young’s modulus (X-Y) | ASTM D638 (ISO 527, GB/T 1040) | 1472 ± 270 MPa |
| Tensile strength (X-Y) | ASTM D638 (ISO 527, GB/T 1040) | 31.9 ± 1.1 MPa
|
| Elongation at break (X-Y) | ASTM D638 (ISO 527, GB/T 1040) | 6.8 ± 0.9 % |
| Bending modulus | ASTM D790 (ISO 178, GB/T 9341) | 1174 ± 64 MPa |
| Bending strength | ASTM D790 (ISO 178, GB/T 9341) | 53.7 ± 2.4 MPa |
| Charpy impact strength | ASTM D790 (ISO 178, GB/T 9341) | 5.1 ± 0.3 kJ/m2 |
All testing specimens were printed under the following conditions:
Nozzle temperature = 240 °C, Printing Speed = 45 mm/s, Build Plate Temperature = 80 °C, Infill = 100%
All specimens were conditioned at room temperature for 24h prior to testing
Product Dimensions: 200 x 200 x 70mm
Next >
Related Products:
Buy Now
Raise3D Premium PETG - 1.75mm - Black - 1kg
Genuine Raise 3D Premium PETG - Black on a 1kg Spool
Buy Now
Raise3D Premium PETG - 1.75mm - Blue - 1kg Spool
Genuine Raise 3D Premium PETG - Blue on a 1kg Spool
Buy Now
PETG Filament - 1.75 mm - White - 1kg spool
This PETG (sometimes called T-Glass) is 1.75mm in diameter on a 1KG spool.
Recommended Temperature: 230-250 degrees
Buy Now
Raise3D Premium PETG - 1.75mm - Red - 1kg
Genuine Raise 3D Premium PETG - with RFID Red on a 1kg Spool
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
