Raise3D Premium PET+GF - Black - 1kg

After annealing, PET GF stabilizes its heat resistance at around 120°C, with tensile modulus and strength of over 4.1 GPa and 70 MPa respectively. Compared to glass fiber-reinforced Nylon filament, the high printability, dimensional stability, high creep resistance, and low moisture absorption makes PET GF an ideal choice for reliable glass fiber composite printing for strong and cost-effective end-use applications, such as jigs & fixture and functional parts. In addition, PET GF provides multiple color choices.

This filament is compatible with Raise3D Industrial PET Support Filament.

Due to the higher fiber content of these filaments, when printing PET GF, an extra wear-resistant nozzle and extrusion system are required for a consistent printing performance. The E2CF and the RMF500 are specially designed for printing high-performance fiber-reinforced composite filaments. As such, it is recommended to use the Raise3D Industrial PET GF filament on machines with toughened filament drive gears, and highly toughened nozzles, silicon carbide or ruby.

Next >

Color, Black: (PMS: 446 C / RAL: 9017)

Specifications: 1.75 mm / 1 kg

Product Dimensions: 210x235x75mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet

Technical Data Sheet