Bambu Lab H2C AMS Combo - 7 Colour 3D Printer

• Hotend Change Multi-material Printing
• Minimal Purge Waste Multi-Color Printing
• Precise & Fast Inductive Nozzle Heating
• Close-loop Servo Extruder
• Full Filament Path AI Error Detection
• 350°C Nozzles & 65°C Active Heated Chamber
• Optional 10W/40W Laser and Cutting Module
• 330 x 320 x 325mm³ Build Volume


* To connect more than one AMS(including AMS 2 Pro, AMS HT), a 4-in-1 PTFE Adapter (FAZ013-N) is needed.
* Cybersecurity compliant with EU RED Article 3.3(d)(e).


Next >

Body

Build Volume (W×D×H)
• Single Nozzle Printing (Left): 325 × 320 × 325 mm³
• Single Nozzle Printing (Right): 305 × 320 × 325 mm³
• Dual Nozzle Printing: 300 × 320 × 325 mm³
• Total Volume for Two Nozzles: 330 × 320 × 325 mm³
Chassis
• Aluminum and Steel
Outer Frame
• Plastic and Glass
Physical Dimensions
• 492 × 514 × 626 mm³
Net Weight
• 32.5 kg

Toolhead

Extruder Gear
• Hardened Steel
Nozzle
• Hardened Steel
Max Nozzle Temperature
• 350 °C
Supported Nozzle Diameter
• 0.2 mm, 0.4 mm, 0.6 mm, 0.8 mm
Filament Cutter
• Built-in
Filament Diameter
• 1.75 mm
Extruder Motor
• Bambu Lab High-precision Permanent Magnet Synchronous Motor

Heatbed

Build Plate Material
• Flexible Steel Plate
Included Build Plate
• Textured PEI Plate
Supported Build Plates
• Textured PEI Plate, Engineering Plate
Max Heatbed Temperature
• 120 °C

Performance

Max Toolhead Speed
• 1000 mm/s
Max Acceleration
• 20,000 mm/s²
Max Flow Rate
• 40 mm³/s

Chamber

Chamber Heating
• Active Chamber Heating Supported
Max Chamber Temperature
• 65 °C

Air Filtration

Pre-filter
• G3 Grade
HEPA Filter
• H12 Grade
Activated Carbon
• Granulated Coconut Shell
VOC Filtration
• Supported
Particulate Filtration
• Supported

Electrical

Voltage
• 100–120 VAC / 200–240 VAC, 50/60 Hz
Max Power
• ~1800–2200 W (depending on region)

Software

Slicer
• Bambu Studio
• Supports third-party slicers (PrusaSlicer, Cura, SuperSlicer)
Supported OS
• Windows, macOS

What’s in the Box

Main Units
• Bambu Lab H2C 3D Printer
• Bambu Lab AMS 2 Pro Filament Feeder
Build Surface & Hardware
• Textured PEI Build Plate
• Spool Holder
• 4-in-1 PTFE Adapter II
Hotends
• 4 × 0.4 mm Induction Hotend
• 2 × 0.4 mm Hardened Steel Hotend
• 1 × 0.6 mm Induction Hotend
• 1 × 0.2 mm Induction Hotend
Accessories
• Accessory Box (tools, maintenance items, spare parts)
Inside Accessory Box (Typical Contents)
• Allen keys
• Nozzle cleaning needle
• Lubrication grease and oil
• Spare wiping pads
• Spare hotend components
• PTFE Tubing
Cables & Setup
• Power Cable
• Quick Start Guide / Manual




Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product