Bambu Lab H2D AMS Combo

Personal manufacturing hub
- Dual-nozzle Multi-material 3D Printing
- 350 x 320 x 325 mm³ Print Volume
- 5µm Resolution Optical Motion Calibration
- Closed-loop Servo Extruder
- 350°C Nozzle & 65°C Active Chamber Heating
- AMS 2 Pro

* To connect more than one AMS(including AMS 2 Pro, AMS HT), a 4-in-1 PTFE Adapter (FAZ013-N) is needed.
* Cybersecurity compliant with EU RED Article 3.3(d)(e).

Next >

Body

Build Volume (W×D×H)
• Single Nozzle Printing: 325 × 320 × 325 mm
• Dual Nozzle Printing: 300 × 320 × 325 mm
• Total Volume for Two Nozzles: 350 × 320 × 325 mm
Chassis
• Aluminum, Steel, Plastic and Glass
Physical Dimensions
• 492 × 514 × 626 mm
Net Weight
• 31 kg

Toolhead

Extruder Type
• Dual Nozzle, Single Toolhead (IDEX-style workflow)
Extruder Motor
• Permanent Magnet Synchronous Motor (DynaSense Extruder)
Nozzle
• Hardened Steel
Max Nozzle Temperature
• 350 °C
Nozzle Diameters
• 0.4mm (included)
• 0.2 mm, 0.6 mm, 0.8 mm (optional extras)
Filament Diameter
• 1.75 mm
Filament Cutter
• Built-in

Heatbed

Build Plate Material
• Flexible Steel Plate
Included Build Plate
• Textured PEI Plate
Max Heatbed Temperature
• 120 °C

Performance

Max Toolhead Speed
• 1000 mm/s
Max Acceleration
• 20,000 mm/s²
Max Flow Rate
• 40 mm³/s
Motion System
• CoreXY with closed-loop control

Chamber

Chamber Type
• Fully Enclosed, Actively Heated
• Max Chamber Temperature: 65 °C

Material System

Included AMS
• AMS 2 Pro (4-spool automatic material system with active drying)
Supported Materials
• PLA, PETG, TPU, ABS, ASA, PC, PA, PET, PVA, BVOH
• Carbon/Glass Fibre Reinforced Materials (PLA, PETG, ABS, ASA, PA, PC, PPS)

Air Filtration

• Pre-filter: G3 Grade
• HEPA Filter: H12 Grade
• Activated CarbonCoconut Shell Carbon

Electronics & Connectivity

Display
• 5-inch Touchscreen
Camera System
• Toolhead Camera + Chamber Camera
Sensors
• Filament Runout, Tangle Detection, Pressure Monitoring, AI Failure Detection
Connectivity
• Wi-Fi (2.4 / 5 GHz), USB, Bambu Bus

Electrical

Voltage
• 100–240 VAC, 50/60 Hz
Max Power
• ~2200 W

Software

Slicer
• Bambu Studio
Supported Platforms
• Windows, macOS


Product Dimensions: 492 × 514 × 626 mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product