Prices + Stock updated 24 Jul @ 17:30
Creality K2 PLUS (basic)
Creality K2 Plus (machine only, no CFS). Includes AI camera for print monitoring and closed-loop stepper motors for increadibly high printing speeds as well as a 350mm³ build volume
Features
Specs
Support
• 350 x 350 x 350mm Build Volume
• 600mm/s Speed
• Max Nozzle Temp: 350 °C
• Apus Direct Drive Extruder
• Tilt Detection
• Sturdy Die-Cast Frame
• FOC Closed-Loop Motors - Quiet and capable of 30,000mm/s² acceleration
• Active Chamber Heater to 60°C
• Internal air circulating fans for even temperature within the camber, and carbon filter to remove VOCs
Next >
• Build Volume: 350 x 350 x 350mm
• Print speed: up to 600mm/s
• Acceleration: up to 30,000 mm/s²
• Print Accuracy: 100mm±0.1mm
• Layer Height: 50 - 300 micron
• Extruder: Apus Dual-Gear Direct Drive Extruder
• Filament Diameter: 1.75mm
• Nozzle Diameter: 0.04mm
• Nozzle Max. Temp.: 350°C
• Heatbed Max. Temp.: 120°C
• Camber Max. Temp: 60°C
• Build Plate: Coated Flexible Magnetic Plate
• Levelling Mode: Anti-tilt auto levelling with LiDAR sensing
• Motors: Closed-Loop FOC Servo Motor
• Display: 4.3inch Touch Screen
• Supported Filament: PLA, ABS, PETG, PA-CF, PETG-CF and more
• AI Camera: Monitoring and Calibration
• Filament Management: Run-out sensor, filament backup, tangle sensor
• Filtration: Air-Filter
• Connectivitiy: USB Drive, Ethernet, WiFi
• Software: CrealityPrint 5.0, G-Code
Machine
• Machine Dimensions: 495 x 515 x 640mm
• Machine + Combo: 495 x 515 x 916mm
• Machine Weight: 34kg
• Rated Voltage: 100-240 V AC 50/60Hz
• Rated Power: 1200 W
Product Dimensions: 495 x 515 x 916mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
Creality K2 PLUS with CFS
The 2024 K2 Plus includes a 4 colour filament switching station, AI camera for print monitoring and closed-loop stepper motors for incredibly high printing speeds as well as a 350mm³ build volume
Buy Now
Creality K2 PEI Frosted Build Plate
Genuine replacement Magnetic Bed for the K2 (Standard)
Buy Now
Original Creality K2 Plus Ceramic Hotend Kit
Creality K2 Plus Ceramic Heating Block Kit - complete hotend
Buy Now
Micro-Swiss FlowTech Hotend for Creality K2 Plus
Microswiss FlowTech Hotend is designed with advanced features for optimized performance.
Buy Now
Creality SpacePi X4 - 4 Spool Dryer
The Creality SpacePi X4 allows you to dry up to 4 spools of filament at the same time, with dual independant chambers so you can heat 2 different types of materials at the same time.
Buy Now
Creality K2 Plus PEI Frosted Build Plate
Replacement Magnetic bed for the K2 Plus
Buy Now
CFS - Creality Filament System
Note: Filament shown in the picture are not included. CFS is currently only compatible with the K2 Plus, K2 Pro and K2.
Buy Now
Creality K2 PRO with CFS
A bigger print experience with a 300mm³ build volume, and all the mod-cons and 1 CFS to automatically swap between 4 different filament spools. You can chain up to 4 CFS together to give 16 colours
Buy Now
Creality K2 Pro PEI Frosted Build Plate
Geuine replacement Magnetic Bed for the K2 Pro
Buy Now
Creality K2 with CFS
Great entry level 3D Printer with lots of user-friendly features.
260mm³ build volume single extruder 3D printer AND 4 filament changer unit
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Melbourne - Clayton, VIC
Sydney - Kingsgrove, NSW
