Prices + Stock updated 9 Mar @ 13:04
Spectrum Nylon, PA6 Neat, 1.75mm, 750g Spool
Polyamide PA6 (Nylon) is an extremely durable, technical material. Parts printed from Nylon have not only a high resistance to abrasion, but also a high temperature resistance. In addition, polyamide PA6 is characterized by good insulating properties, chemical resistance to greases, oils and high mechanical strength. The above features make it applicable to print functional parts, including slide bearings, gearwheels or guideways. Nylon PA6 filament is very sensitive to moisture. In order to obtain the best performance of the printed object, it is recommended to dry the material carefully before printing. Spectrum Filaments PA6 as one of the few is also characterized by very low shrinkage of approx. 0.3%.
Features
Specs
Support
Spectrum Nylon PA6 Low Warp advantages:
- Very low processing shrinkage 0.3%
- High temperature resistance (upto 150°C for short periods)
- Easy separation of the object from the table
- Resistance to abrasion
- A wide range of applications
- Chemical resistance to greases and oils
- High mechanical strength
- Very strong bonding of layers
Poliamide Low Warp is an extremely durable construction material based on polycaprolactam improved with admixtures to reduce the high shrinkage inherent to the processing of such materials. A major feature of the polyamide is its increased mechanical strength as compared to other plastics.
The material also features exceptional thermal properties, chemical resistance and a relatively high resistance to corrosion stimulators. Poliamide Low Warp belongs to the few materials with low processing shrinkage, approx. 0.3%.
To attain the very attractive properties of Poliamide Low Warp, as regards the technical aspects, you need to follow the basic storage rules for such materials (in a dry and dark place with humidity below 15%). To obtain the best parameters of the printed object possible, it is recommended to dry the material prior to work.
Next >
- Color: Natural
- Diameter: 1.75mm
- Dimensional tolerance: ± 0.05mm
- Printing temperature: 250-270°C
- Heated bed: 85-100°C
- Net weight: 500g
- Total weight: 800g
Spool Dimensions:
- External Diameter – 20cm
- Internal Diameter - 52mm
- Width 5.2cm
Product Dimensions: 200 x 200 x 52mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
Material Safety Data Sheet
Technical Data Sheet
Buy Now
Spectrum Nylon, PA6 Carbon Fibre, 1.75mm, 750g
High temperature construction material
Nylon PA6 CF15 is a high-temperature, black, PA6-based construction material. Filling with 15% carbon fibres increases significantly the mechanical strength of the polyamide the material is based on. The filaments specific quality is the moisture absorption reduced by half and the water absorption time is four times lower than that of the pure PA6. Printing does not require a heated chamber and no deformation occurs. The material is compatible with the HIPS and BVOH support materials. In addition, Nylon PA6 CF15 features a very low linear shrinkage (up to 0.1%), a high deformation temperature (240°C), working temperature (180°C) and low thermal expansion coefficient (0.4 10-5/K).
Buy Now
Spectrum Nylon, PA6 + Glass Beads, 1.75mm, 750g Spool
Poliamide filled with glass micro-spheres
Nylon PA6 GK10 is a new, high-temperature PA6-based construction material in the natural colour. Perfect for 3D printing. Filled with glass beads, it is more flexible than the polyamide the material is based on. Its specific quality is a low impact of moisture and temperature on the measurements or electrical properties as compared to PA66. In addition, Nylon PA6 GK10 features a low linear shrinkage (up to 0.3-0.5%) and a relatively high working temperature (160oC).
Buy Now
Spectrum Nylon, PA6 Low Warp, 1.75mm, 1kg Spool
Polyamide PA6 (Nylon) is an extremely durable, technical material. Parts printed from Nylon have not only a high resistance to abrasion, but also a high temperature resistance. In addition, polyamide PA6 is characterized by good insulating properties, chemical resistance to greases, oils and high mechanical strength. The above features make it applicable to print functional parts, including slide bearings, gearwheels or guideways. Nylon PA6 filament is very sensitive to moisture. In order to obtain the best performance of the printed object, it is recommended to dry the material carefully before printing. Spectrum Filaments PA6 as one of the few is also characterized by very low shrinkage of approx. 0.3%.
Buy Now
Spectrum Nylon, PA6 Low Warp, 1.75mm, 500g Spool
Polyamide PA6 (Nylon) is an extremely durable, technical material. Parts printed from Nylon have not only a high resistance to abrasion, but also a high temperature resistance. In addition, polyamide PA6 is characterized by good insulating properties, chemical resistance to greases, oils and high mechanical strength. The above features make it applicable to print functional parts, including slide bearings, gearwheels or guideways. Nylon PA6 filament is very sensitive to moisture. In order to obtain the best performance of the printed object, it is recommended to dry the material carefully before printing. Spectrum Filaments PA6 as one of the few is also characterized by very low shrinkage of approx. 0.3%.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
