The T Series system consists of a heat sensitive BlazeCut Tube made of specialised plastic which is closed by a stainless steel fittings on each end. The BlazeCut Tube has both storage and detection function which means that the extinguishing agent is stored directly in the BlazeCut Tube and no additional storage device such as cylinder is needed.

0.25m T Series includes user manual, high temp cable ties, general warning label and BlazeCut sticker

Compact; small footprint of the BlazeCut Tube with A, B, C and electrical fires class rating can protect almost any space
No cylinder for storage required; the whole system can be placed inside the protected enclosure as there is no cylinder
Cost-effective; long working life, automatic activation, zero maintenance beats the competition in cost-effectiveness

Features

Optional pressure switch; and other additional components like signaling unit to perform further safety functions
Clean and effective extinguishing agent; world-wide known and accepted HFC gas (HFC-227ea) fire agent
No pressurisation needed; the system works by increasing pressure of the extinguishing agent when heated
Automatic operation; based on increased temperature: ideal for non-occupied spaces
Fully independent; TxxxE system is operational 24/7 without any power supply
Maintenance free; during entire working life means zero maintenance costs
Long working life; up to 10 years depending on the type of application
No harm; to protected enclosure when system discharged
Simple installation; system easily secured by cable ties or clamps
Pressure gauge; to monitor the system pressure at any time
Minimum operation temperatures; down to -40°C
Maximum operation temperature; up to 90°C


Next >

Applications can be calculated by a simple process, measure the sealed enclosures Width x Height x Depth in metres and this will calculate your required volume in m3. Then refer to the specifications below for the maximum volume protected for electrical or engine applications to select the suitable T Series model.
Example: The Raise Pro2/3 body is around .6 x .635 x 57.5 = 0.21 m³ Note: the enclosure should be enclosed or have minimal ventilation. The T Series system is not suitable for open areas. For vehicle applications please refer to the application guide that can be found online at www.BlazeCut.com

• Model: T025E
• Maximum Volume Electrical Fires: 0.46 m³ @ 20°C
• Amount of Agent: 0.25 kg ± 2g
• System Length: 113 cm
• Operation Temperature: -40°C to +90°C
• Activation Temperature: 105°C ± 3°C


Product Dimensions: 370x370x30


Next >

Bilby 3D provides a 60 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket