Compatibility: Connectors match the following machines, please note:
- Makerbot Replicator 1 and FlashForge Creator Pro - this has shorter leads - you will need to solder/splice the leads if you are using it as a replacement for the genuine part
- For the Makerbot Replicator 2 and 2X - leads are longer than those normally fitted, you can coil them and secure them out of the way, or cut and attach new connector (not stocked by us)
- For the FlashForge Dreamer and Creator3v2 - the leads are longer than normal, and the polarity is reversed. If you wish to use this fan, you will need to push down the tangs to release the terminals from the connector body then push them in the other way around. Fiddly!

Next >

- 24v DC Black brushless fan
- 40 x 40 x 10mm
- 32mm between mounting hole centres
- Lead length is 285mm.
- 9 Blades
- Draws 0.1 A


Product Dimensions: 40x40x10mm


Next >

Bilby 3D provides a 1 month Australian, back-to-base warranty of this product (Terms and conditions)
For technical support of this product please read our knowledge bank or log a ticket