Dreamer / Inventor / CreatorPro Blue Print Bed Tape, 23x15cm
This is a genuine FlashForge replacement sheet for the FlashForge Dreamer, Inventor1, Creator Pro 2016 (v5) and Creator Pro2 (IDEX) printing bed.
It is similar to BuildTak but with more texture on the surface, and a very aggressive glue that does not like to dissolve
FeaturesSpecsSupport
Size: 232 x 154mm
It has an adhesive layer with backing sheet (0.7mm total thickness with backing)
Tip: When removing the old tape, the glue is very aggressive. We recommend pre-heating to 80-100°C Peel off the old tape and use it (glue side down) to wipe off any remaining glue. Allow to cool before fitting new sheet
Next >
Size: 232 x 154mm
It has an adhesive layer with backing sheet (0.7mm total thickness with backing)
This tape suits:
- Dreamer
- Creator
- Creator Pro
- Inventor (1)
- Creator Pro 2
Product Dimensions: 232 x 154 x 0.7mm
Next >
Please clean with a clean cloth, a damp cloth, or slightly soapy cloth (then make sure you get all the soap off!).
Acetone will ruin this surface - DO NOT USE!This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
BuildTak Nylon+ Tape for FlashForge Dreamer / Creator - 235 x 159mm
Manufactured in the USA to ensure consistent quality and composition, BuildTak Nyon+ build surfaces come with the no-cleanup BuildTak Original adhesive.
Buy Now
3DLac PLUS Bed Spray - 100ml Spray Bottle
Bed Adhesion and Anti-Warping Spray - easily spray a fine mist on your bed to ensure the print stays where it should, but still removes without fuss.
Buy Now
BuildTak FlexiPlate System for FlashForge Creator Pro or Pro2 IDEX
BuildTak is dedicated to making the 3D printing experience as easy as possible, this three-part system was developed specifically to eliminate the hassle of print removal
Buy Now
Finder Blue Print Bed Tape, 15x15cm
This is a genuine FlashForge replacement sheet for the Finder printing bed.
Buy Now
BuildTak (Replicator 2), 28x15cm
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer.
Buy Now
25x Bulk Pack Blue Tape Precut Sheet (for Replicator 1,2,2X)
This is a 25 sheet pack of our die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 x 16cm. The backing peels off for easy adhesion.
Buy Now
Buildtak Spatula
With a right angled handle and a blade that is very thin at the front edge, this is a great tool for getting those really well stuck prints off the bed!
Buy Now
BuildTak Print Bed Tape 40x40 cm
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer.
Buy Now
100x Bulk Pack Blue Tape Precut Sheet (for Replicator 1,2,2X)
This is a 100 sheet pack of our die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 x 16cm. The backing peels off for easy adhesion.
Buy Now
BuildTak Spare Flex Plate for FlastForge Deamer & Creator Pro
***PLEASE NOTE: THIS IS AN ADDITIONAL FLEXPLATE AND REQUIRES A MAGNETIC MOUNTING BASE & BUILDTAK SHEET (included in the Complete BuildTak FlexPlate System). It does not come packaged with any surface. ***
Buy Now
BuildTak PEI Bed Tape for FlashForge Creator Pro / Dreamer - 235x235mm
Introducing the BuildTak Polyetherimide (PEI) Print Surface. Now you can choose the print surface best-suited to the material being printed.
Slightly less model adhesion than the original BuildTak, it is recommended where consistant prints are required, but a bit easier to remove the print, such as large and PETG prints
Buy Now
Plastic Scraper with soft edge
This plastic scraper is ideal for smoothing tape onto your priter bed, and helping to remove prints and waste from your bed. One edge is sharp, the other has a soft fabric glued on (similar to loop velcro)
Buy Now
Inventor 2+ Blue Print Bed Tape, 16x15cm
This is a genuine FlashForge replacement sheet for the Inventor 2 / 2S and 2SE printing bed.
Buy Now
BOX of 3DLac PLUS Bed Spray - 100ml Spray Bottle - Box of 12
Bed Adhesion and Anti-Warping Spray - easily spray a fine mist on your bed to ensure the print stays where it should, but still removes without fuss.
Buy Now
Guider 2 Blue Print Bed Tape 30x26cm
This is a genuine FlashForge replacement sheet for the FlashForge Guider2 printing bed.
It is similar to BuildTak, but with more surface texture, and can be cut down with scissors or a knife and used on other machines with a differently sized bed
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
