Extreme detail

High resolution for high detail printing. Micro hole and small pillars can be print easily.

Strong build platform adhesion

Don’t worry about “printed parts falling off the build platform”

The Key features

•General-purpose resin, well balanced for performance and printability
•High resolution and surface quality
•High success rate on most resin printers
• Decent toughness and low odor
•Fast curing time

Save time and process easily.

•Less exposure time, faster-forming speed with extraordinary fluidity.
•Place models in hot water to remove supports without damage
•Bath with 99% IPA
•Wash all prints in water to remove IPA residue
•Allow prints to dry and cure prints under UV
•The paint adheres without having to sand which saves a lot of time.

Universal Compatibility

•Compatible with most LCD printers with 405nm wavelength. From 5.5 inches LCD screen to 15.6 inches.
•On Mono screens, the recommended exposure time is from 2.5s to 3s. On RGB screens, the recommended exposure time is from 6s to 8s


Next >

Storage method

1. Please keep the resin at room temperature (15 - 35?) and Sealed storage, the lower the temperature, the higher the viscosity of the resin.
2. Keep away from light seals at room temperature.

Usage

1. Shake well before use, prohibiting the use of resin in places where there is a lot of sunlight.
2. Wear gloves before use to avoid direct contact with the skin and keep the room ventilated.
3. Printed models need to use high-concentration alcohol to clean about 30S (recommended concentration of 95% or more, the higher the better)

Product Dimensions: 85 x 125 x 220mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.

Material Safety Data Sheet

Technical Data Sheet