Prices + Stock updated 8 Sep @ 10:05
FlashForge LCD Resin - ABS LIKE- Grey 500ml
LCD ABS-like Photopolymer Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Features
Specs
Support
As a general comparison for you, ABS-LIKE resin is not as hard/tough as standard resin (82D shore hardness vs 85D), tensile strength is also lower.
Good mechanical strength and rigid-tough, low shrinkage. Low odor
This resin is easy to clean (in isopropal alcohol) and paint.
It has good long-term storage stability.
Compatible with most LCD 3D printers, but specifically formulated for the Flashforge Foto 133 and Foto 8.9
Specifications
Density (g/ml): 1.05 ~ 1.15
Viscosity (cps, 25°)C: 300 ~ 400
Hardness (D): 82 D
Tensile Strength (MPa): 37 Mpa
Elongation @ break (%): 11%
Flexural Modulus (MPa): 2100 Mpa
Flexural Strength (MPa): 71 Mpa
Next >
Product Dimensions: 210 x 65dia mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Material Safety Data Sheet
This product is in the categories:
Related Products:
Buy Now
FlashForge LCD Resin - Standard - Grey 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Standard - Red 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Standard - Transparent 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Standard - White 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Standard - Black 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Standard - Green 500ml
Standard Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Washable in water- Grey 500ml
LCD Water washable Photopolymer Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Washable in water- White 500ml
LCD Water washable Photopolymer Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
Buy Now
FlashForge LCD Resin - Washable in water- Orange/Red 500ml
LCD Water washable Photopolymer Resin for the Foto13.3 and Foto8.9 Resin printers by Flashforge
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15