Bed Adhesion and Anti-Warping Spray - easily spray a fine mist on your bed to ensure the print stays where it should, but still removes without fuss.

This plastic scraper is ideal for smoothing tape onto your priter bed, and helping to remove prints and waste from your bed. One edge is sharp, the other has a soft fabric glued on (similar to loop velcro)

This longer version of the popular BuildTak Spatula is designed for getting those larger prints off the bed!

The BuildTak Spatula is a removal tool designed and developed specifically for 3D Printing. No more using a tool adapted from some other purpose. This awesome new tool features a stainless steel blade with a thin yet rigid front edge for getting under prints. The handle is ergonomic and uses a non-slip rubber grip.

Rapid Tac - Cleaner and Application Fluid. 4oz / 110g spray bottle
Use with paper towel (no cloths) to clean your bed and apply bed tape easily, without any bubbles.
The bottle says: For wet application of decals, graphics and film. Formulated for premium, cast film applications in all climates

• Eliminate bubbles and wrinkles
• Reposition while applying
• Effective in all weather conditions

Single spare PEI sheet at size of 1075x355mm covering a THIRD of the BIG-Meter bed plate. Please order 3 pcs in order to cover the entire bed plate.

This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer.

This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer.

This die cut self adhesive Blue tape is designed to fit perfectly on the Makerbot Replicator 1, 2 or 2X, but can also be used on other 3D printers, to help PLA, Wood or Brick filaments prints stick to the bed. It is 28 X 16cm. The backing peals off for easy adhesion. Price is per sheet (also available in bulk packs)
We manufacture this tape to have a strong adhesive and be better for PLA adhesion than painters tape, or Makerbot blue tape sheets

130mm long needle nosed pliers.

This 2022 update to a solid large 3D printer became much quieter, in addition to a flexible bed And spare bed Tape, Toughend filament drive gear, Toughened nozzle (included in the spare parts pack and not fitted) and improved filter. It has a user friendly touchsreen and webcam, plus a generous 280 x 250 x 300mm build volume.
All machines come standard with high-temperature extruders (to 300deg).

Introducing the BuildTak Polyetherimide (PEI) Print Surface. Now you can choose the print surface best-suited to the material being printed.
Slightly less model adhesion than the original BuildTak, it is recommended where consistant prints are required, but a bit easier to remove the print, such as large and PETG prints

Introducing the BuildTak Polyetherimide (PEI) Print Surface. Now you can choose the print surface best-suited to the material being printed.
Slightly less model adhesion than the original BuildTak, it is recommended where consistant prints are required, but a bit easier to remove the print, such as large and PETG prints

This Makers Pack is especially designed for those that want to get into the basics of 3D printing, but will have a lot to print.

This blue painters (masking) tape is widely accepted as the standard for covering your bed for printing with PLA.
One roll will completely re-cover a Replicator bed over 50 times, or a prusa bed over 43 times.
Genuine 3M Edge-Lock tape

This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes (like Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer.

Precision Sidecutters for cutting wire, leads etc.

Introducing the BuildTak Polyetherimide (PEI) Print Surface. Now you can choose the print surface best-suited to the material being printed.
Slightly less model adhesion than the original BuildTak, it is recommended where consistant prints are required, but a bit easier to remove the print, such as large and PETG prints

This is a genuine FlashForge replacement sheet for the Finder printing bed.

This tool kit is specifically designed for Flashforge printers, with all tools you need for repair and maintain of your machines

This tool kit is specifically designed to be inserted into your 3D Printer feeder to push down any broken material and assist in clearing blockages in the barrel and or feeder.

Handy tool for pushing jammed filament in to your extruder

This is the original tape fitted to your Raise 3D print bed
Size: 332 x 340mm

This is a genuine FlashForge replacement sheet for the Inventor 2 / 2S and 2SE printing bed.

Bed Adhesion and Anti-Warping Spray - easily spray a fine mist on your bed to ensure the print stays where it should, but still removes without fuss.

This is a genuine FlashForge replacement sheet for the FlashForge Guider2 printing bed. It is similar to BuildTak, but with more surface texture, and can be cut down with scissors or a knife and used on other machines with a differently sized bed

This is a genuine FlashForge replacement sheet for the FlashForge Dreamer, Inventor1, Creator Pro 2016 (v5) and Creator Pro2 (IDEX) printing bed.
It is similar to BuildTak but with more texture on the surface, and a very aggressive glue that does not like to dissolve