Raise3D SLS System - Automated Sand Blasting Unit - B520

Completes the SLS workflow, from powder to final parts.

Easy-to-se

Intuitive workflow
Manual Operation Time <5 min

Clean & Polished parts

Produce clean parts free of media & powder on surface
Reduce surface roughness
(Optional) Polishing Module

Easy Swap Basket

Take & swap between different sizes, function, and could use as transfer container
Swap to L size basket which allows to process parts produced from big machines like


Next >

Blasting Basket Size
• Standard: Ø262 × 520 mm / f10.3 × 20.5 inch
• Large: Ø467 × 520 mm / f18.4 × 20.5 inch

Compatibility
• Raise3D RMS220
• Third-party powder sintering 3D printers

Supported Process
• Sandblasting: Automatic / Manual
• Polishing (polishing module required): Automatic

Recommended Capacity
• Standard: 10L
• Large: 30L

Media Hopper Size - 9L, approximately equal to 14kg of glass beads

Waste Hopper Size - 15L

Compressed Air Input
• Flow rate: >360 SLPM @ 6 bar
• Pressure: 6-8 bar

• Machine Size: Incl. door handle: 765 × 990 × 1790 mm. Door handle not included: 695 × 990 × 1790 mm
• Weight: 200 kg / 441 lbs
• Power: 100-240VAC, 50/60Hz, 230V@2A

• Noise: <75dB(A) when running, excluding external air compressor
• Environment: Operating: temperature 15-30°C, humidity =50%RH without condensing. Storage: temperature -10°C-60°C, humidity =50%RH without condensing
• Ventilation: HEPA Filter
• Compressed Air Input: Flow rate: >360 SLPM @ 6 bar, Pressure: 6-8 bar
• User Interface: 7 Touchscreen; Foot switch
• Screen Resolution: 1024 × 600
• Interlocks: Emergency stop switch; Safety door lock
• Interfaces: TF × 2




Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 5 or more machines at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.