Prices + Stock updated 10 Jun @ 10:45
Spectrum - 1.75mm - Carbon Fibre Mix pack - 5x250g spools
Get a range of Spectrum Carbon Fibre Reinforced filament with this Mix pack of 5 mini spools.
The included filament are: PLA Carbon, PETG Carbo, ASA-X CF10, PA6 Low Warp CF15
Features
Specs
Support
Spectrum 5Pack sets have been prepared so that each customer can create various elements in a wide range of colors and materials without the need to purchase more of a single type of filament.
All filaments included in the Spectrum 5Pack set are delivered on ecological, cardboard spools.
Eco-friendly cardboard spools
Always 5 spools 0.25 kg each
Various materials & colors
Next >
Spool Size:
- Inner Diameter (hole): 52mm
- Width: 44mm
- Outer Diameter: 140mm
- Empty weight: 80g
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
Buy Now
Spectrum ASA-X CF10 - 1.75mm black - 1kg Spool
Analysing the feedback from the users of filament, Spectrum decided to expand the range of materials for outdoor use in conditions of increased exposure to UV radiation, temperature and humidity. ASA, a well-known polymer that is a highly weather-resistant alternative to ABS, has become the base for another composite material, Spectrum ASA-X CF10.
Buy Now
Spectrum Nylon, PA6 Carbon Fibre, Black, 1.75mm, 1kg Spool - UNTIL SOLD OUT
High temperature construction material
Nylon PA6 CF15 is a high-temperature, black, PA6-based construction material. Filling with 15% carbon fibres increases significantly the mechanical strength of the polyamide the material is based on.
Buy Now
Spectrum Nylon, PA6 Carbon Fibre, 1.75mm, 500g - UNTIL SOLD OUT
High temperature construction material
Nylon PA6 CF15 is a high-temperature, black, PA6-based construction material. Filling with 15% carbon fibres increases significantly the mechanical strength of the polyamide the material is based on. The filaments specific quality is the moisture absorption reduced by half and the water absorption time is four times lower than that of the pure PA6. Printing does not require a heated chamber and no deformation occurs. The material is compatible with the HIPS and BVOH support materials. In addition, Nylon PA6 CF15 features a very low linear shrinkage (up to 0.1%), a high deformation temperature (240°C), working temperature (180°C) and low thermal expansion coefficient (0.4 10-5/K).
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Melbourne - Clayton, VIC
Sydney - Kingsgrove, NSW
