MINGDA Industrial PET-CF is a carbon fiber-reinforced composite filament based on PET (Polyethylene terephthalate). Well-dispersed 15wt% carbon fibers enhance the rigidity, strength, heat, and chemical resistance of the PET matrix. After annealing, PET-CF stabilizes its heat resistance at around 150ºC and tensile modulus and strength of over 6 GPa and 80 MPa respectively. The parameters of high printability, dimensional stability, high creep resistance, and low moisture absorption make PET-CF an ideal choice for reliable carbon fiber composite printing for strong and cost-effective end-use applications, such as jigs. fixtures, functional parts.

• HDT up to 150°C
• Strong and high stiffness
• High dimensional stability
• Low moisture absorption
• Creep and chemical resistance

Recommended Support: S-Multi

Applications

• Automobile
• Aerospace
• End-use parts
• Jigs & Fixtures
• Manufacture aids
• Electrical and electronics (E&E) industry


Next >

Recommended Print Settings

• Nozzle temperature: 280-320°C
• Build platform temperature (°C): 60-80°C
• Printing speed: 30-120 mm/s
• Cooling fan: Off
• Bed Prep: PEI FIlm or Coating with PVP Glue

Spool Size

• Diameter: 296mm
• Width: 95mm
• Hole Size: 56mm

Product Dimensions: Ø296 x 95mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.