Keep you filament away from dust and moisture with the PolyBox filament storage box - with inbuilt temperature and humidity gauge
FeaturesSpecsSupport
PolyBox™ is a filament storage box that allows you to store your materials in their optimum printing environment while still being able to print with them.
PolyBox™ is a filament storage box that allows you to store your materials in their optimum printing environment while still being able to print with them. PolyBox™ features a thermo-hygrometer to monitor your filaments inside the box. The humidity is regulated by large desiccant bags which absorb moisture from the air inside the PolyBox™, specifically designed for hygroscopic materials such as PolySmooth™, PVA or Nylon. The PolyBox™ can house two 1kg spools simultaneously or one 3kg spool and is compatible with both 1.75mm and 2.85mm filament diameters.
Comes with 1.5m of feeder tube (cut in half for 2 spools) to use is desired.
Requires simple assembly (video includes assembly demostration)
Next >
- Desiccant type: Silica gel
- Desiccant specifications: 2*Desiccant sachets - can now be refreshed in a microwave (follow instructions)
- Supported filament spools: 2 spools = 1kg or 1 spool 3kg
- 2 Spools: up to 78mm wide
- 1 Single Spool: up to 172mm wide
- Diameter: Due to the rounded corners, a full width spool cannot take advantage of the full 300mm diameter possible, however thinner width spools are able to make full use of it
- Humidity range: 10-99%
- Accuracy: &plusminus;5%
- Measurement Resolution: 1%
- Response: 10 seconds
- Temperature range: -50~70 °C
- Accuracy: &plusminus;1 °C
- Battery specifications: LR44*1
- Product size: 315(L)*190(W)*310(H)
- Package size: 196(L)*320(W)*320(H)
- Product weight (without desiccants or filament): 1.150kgs
- Package weight: 1.700kgs
Product Dimensions: 315 x 190 x 310mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Related Products:
Buy Now
Silicia Gel 10g sachet (150g Pack)
Place your spool into the zip lock bag with some of the sachets, to keep your spool dry when not in use; or place in your plastic storage container.
Buy Now
Polymaker PolyDryer - Dry Dock and 1 Box
PolyDryer™ is your ultimate 3D filament drying & storage solution which protect against dust and moisture. Printing with wet 3D filament can lead to various issues, such as stringing, clogging and rough or poor surface quality, especially noticeable during high-speed printing.
Buy Now
88mm Hygrometer - Thermometer
This hygrometer measures both humidity and temperature, and remembers the highest and lowest values measured.
PolyMide™ PA6-GF is a 25% glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Buy Now
Pro PLA Filament - 1.75mm - Blue - 3kg spool
Bilby3D Professional PLA filament in blue. Perfectly wound and humidity resistant for professional results.
Buy Now
PolyMaker PolyDissolve S2, 1.75mm, 500g
PolyDissolve™ S2 is a dissolvable support for PC, ABS and ASA based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
We recommend that this material be used with the PolyBox™ to keep it at dry conditions (relative humidity of 15% or less) at all times to maintain the best printing results.
Buy Now
Makerbot CoPA Nylon + Carbon Fibre, 1.75mm, 500g
Makerbot Nylon (PA 6/66) Carbon Fibre has the highest peak performance in all categories, it is significantly affected by moisture which will reduce both strength and modulus.
An easy-to-use, durable desktop 3D printer ready to increase precision standards, scale production, and add a powerful new manufacturing resource,
We have ONE new machine left. we also have fully tested ex-demo units with different life spans, contact us for details.
Buy Now
Raise3D 2.5 kg Filament Box
A 2.5kg filament box is a standard option for large spools of 3D printing filament, providing a substantial amount of material for printing projects.
Buy Now
PolyMaker PolyDissolve S1, 1.75mm, 750g
PolyDissolve™ S1 is a water dissolvable support for PLA, TPU, PVB and Nylon based filaments from Polymakers portfolio. It is specifically engineered to have a perfect interface with these materials while also displaying good solubility.
PolyMide™ PA6-GF is a 25% glass fiber reinforced Nylon (PA6) that offers outstanding mechanical properties, namely, impact strength and stiffness. The material exhibits excellent thermal and mechanical properties without sacrificing the layer adhesion. PolyMide™ PA6-GF can be used to print parts working in a wide temperature range and has been utilized to create custom lab equipment working at temperatures as low as -190°C.
Buy Now
Pro PLA Filament - 1.75mm - Silver - 3kg spool
Bilby3D Professional PLA filament in silver. Perfectly wound and humidity resistant for professional results.
PolyMide™ PA6-CF is a 20% carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
Buy Now
Pro PLA Filament - 1.75mm - White - 3kg spool
Bilby3D Professional PLA filament in white. Perfectly wound and humidity resistant for professional results.
Buy Now
Pro PLA Filament - 1.75mm - Black - 3kg spool
Bilby3D Professional PLA filament in black. Perfectly wound and humidity resistant for professional results.
PolyMide™ PA6-CF is a carbon fiber reinforced nylon (PA6) 3D printing material offering the highest strength, impact resistance and heat deflection of all Polymaker 3D printing materials.
Buy Now
Polymaker PolyDryer - Box ONLY
Don’t worry about moisture ruining your prints, the PolyDryer™ Box has the best sealing performance on the market. PolyDryer™ Box allows for long-term protection of materials. Its exceptional sealing capability and visible desiccant indicator display maintains optimal humidity levels, ensuring that filaments are dry and ready for printing.
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
