BASF Ultracur3D CK 02 Yellow Resin Pigment - 0.5kg
The Ultracur3D® CK Line can be used to print parts in a wide range of colors, without the need for postprocessing. To use the color kits, you just mix a small amount of the color kit into your clear base resin before printing
FeaturesSpecsSupport
Available Colors
• Ultracur3D® CK 01 (White)
• Ultracur3D® CK 02 (Yellow)
• Ultracur3D® CK 03 (Cyan)
• Ultracur3D® CK 04 (Magenta)
• Ultracur3D® CK 06 (Black)
Mixing method:
1) Shake the color kits well before use. Pigment dispersions will often show some settling over time
2) Determine the amount of color kit you want to add. You can use the table below as a guideline
Remarks:
In the examples below, Ultracur3D® ST 80 is used as the clear base resin. Results with other materials will usually be similar, but take into account that if your base resin has a strong background color (e.g. yellow or brown), this may affect the final color
The table uses weight-based ratio’s. However, the same ratio’s can be used on a volume-base (e.g. using a syringe to add color kit). Liquid densities of both the color kits as well as most available resins are all very similar (around 1.0-1.1 g/ml), so any effects on the final color will be negligible
3) Mix the clear resin with the color kit:
Option 1: using an external mixer, just mix until the mixture looks homogenous. We have good results with a Silverson L5M-A mixer, at 1500 rpm for 15-30 minutes. Since materials will be exposed to light, it is recommended to do this in a UV-free (orange light) room
Option 2: Add the required amount of Color kit to your base resin in its original container (bottle) and shake until homogenous
4) Determine appropriate printing parameters (see indications below) and start printing!
Compatibility with other Ultracur3D® 3D-printing resin
The Ultracur3D® CK Line has very good compatibility with the rigid Ultracur3D® materials (Ultracur3D® ST 80, Ultracur3D® ST 45, Ultracur3D® RG 35 and Ultracur3D® RG 50). Compatibility with Ultracur3D® flexible materials (FL / EL – Line) is more difficult and tests are still ongoing.
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.
The Ultracur3D® CK Line can be used to print parts in a wide range of colors, without the need for postprocessing. To use the color kits, you just mix a small amount of the color kit into your clear base resin before printing
Buy Now
BASF Ultracur3D CK 06 Black Resin Pigment - 0.5kg
The Ultracur3D® CK Line can be used to print parts in a wide range of colors, without the need for postprocessing. To use the color kits, you just mix a small amount of the color kit into your clear base resin before printing
Buy Now
BASF Ultracur3D CK 04 Magenta Resin Pigment - 0.5kg
The Ultracur3D® CK Line can be used to print parts in a wide range of colors, without the need for postprocessing. To use the color kits, you just mix a small amount of the color kit into your clear base resin before printing
Buy Now
BASF Ultracur3D ST 80 Tough Resin - Clear - 1kg
Ultracur3D® ST 80 is new to the Forward AM Tough line of reactive urethane photopolymers. It is an impressively cost-effective allrounder that delivers high toughness, impact resistance, and long-term stability of 3D printed parts at a very attractive price.
Buy Now
BASF Ultracur3D ST 80 Tough Resin - Black - 1kg
Ultracur3D® ST 80 is new to the Forward AM Tough line of reactive urethane photopolymers. It is an impressively cost-effective allrounder that delivers high toughness, impact resistance, and long-term stability of 3D printed parts at a very attractive price.
Buy Now
BASF Ultracur3D ST 80 Tough Resin - Grey - 1kg
Ultracur3D® ST 80 is new to the Forward AM Tough line of reactive urethane photopolymers. It is an impressively cost-effective allrounder that delivers high toughness, impact resistance, and long-term stability of 3D printed parts at a very attractive price.
Buy Now
BASF Ultracur3D ST 80 Tough Resin - White - 1kg
Ultracur3D® ST 80 is new to the Forward AM Tough line of reactive urethane photopolymers. It is an impressively cost-effective allrounder that delivers high toughness, impact resistance, and long-term stability of 3D printed parts at a very attractive price.
Buy Now
BASF Ultracur3D CK 03 Cyan Resin Pigment - 0.5kg
The Ultracur3D® CK Line can be used to print parts in a wide range of colors, without the need for postprocessing. To use the color kits, you just mix a small amount of the color kit into your clear base resin before printing
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
