Outstanding properties place Ultracur3D® RG 3280 in an exceptional position among our other resins. Moreover, despite the high particle loading, the viscosity is kept low, and the settling of particles is limited, making this resin very easy to handle and print. Its high stiffness and temperature resistance make this the perfect material for tooling, molding, and wind tunnel testing.

The material has a white, ceramic-like color and feel.

Benefits at a Glance

• Superior stiffness
• Superior temperature performance
• Very fast and easy to print
• High suspension stability

Example Applications

• Tooling
• Molding
• Wind tunnel testing

Material Properties

• Young’s modulus: 10,000 MPa
• Tensile strength: 76 MPa
• Heat deflection temperature: >280 °C
• Viscosity, 30 °C: 230 mPas


Next > More Information

Stratasys Origin One, BASF Recommendations:
• Layer Thickness: 100µm
• Irradiance 5 mW/cm²
• Exposure Time: 1.4s
• Wash Cycle 1: 1min in IPA in Rotor/Propeller mode
• Wash Cycle 2; 1min in IPA in Rotor/Propeller mode
• Wait before post-processing: None
• Post Curing: 15min under Dymax ECE 2000 spotlight, flip and repeat

Product Dimensions: 90x90x220mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
Technical Data Sheet