This Polyimide (also known as Kapton) Tape is extra wide (100mm), great for covering your build platform when printing with ABS. The roll is approx 33m long and Kapton is approx 0.02mm thick
This Polyimide (also known as Kapton) Tape is great for covering your build platform or providing electrical insultation. ABS stick to this when hot (with a heated bed), but releases easily when cold.
This Polyimide (also known as Kapton) Tape is a high temperature insulative tape. It uses a silicon based adhesive to withstand high temperatures up to 260 C.
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer.
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes (like Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer.
This amazing build tape is a special plastic (self adhesive) surface that is stronger and better than old tapes(such as Kapton and Blue Tape), and holds objects on the bed so well. It also lasts significantly longer.
This 1 inch wide ceramic tape is used to wrap your heater block and reduce heat transfer to both the extruder and your work piece. Fix by wrapping in kapton tape.
The tape on your Reprap will need replacing from time to time, especially when a print fails and the melted plastic gets caught up in the print head - it can sometimes stick to the ceramic tape and rip it on removal - careful not to pull on the temperature sensor wire!
Printrbot (ply) Simple Makers Kit Heated Bed Upgrade
only available until sold out
This Heated Bed Upgrade Kit is for the Makers Kit model 1405, rev F. The heat plate gives you the option to print ABS on your Simple Makers Kit 1405. ATX power supply required, but not included. Current model is rev F. Includes: Heat Plate for Makers Kit 1405 print bed; Notched bar end wood parts to allow wire management; Kapton tape; Radiant barrier; Thermistor with Cable; Zip Ties Additional Requirements: ATX Power Supply, Power Tower (for Australian Safety Standard compiance), assembly. FAQ - Will this heated bed upgrade work with Makers XL Upgrade for 1405? Answer - The metal bed for XL Upgrade does not have the hole pattern for this heat plate. You will need to drill your own holes to mount the heat plate. Once drilled, depending how you mount the heat plate, you may lose printable area on your print bed. XL Upgrade for 1405 owners purchase and hack their printer at their own risk (no replacement parts will be provided for bad hacks).
Sydney - Kingsgrove, NSW
Melbourne - Clayton, VIC
