Nylon PA12 + CF Filament - Black - 1kg

Carbon fibre filaments are composite materials made by mixing short strand carbon fibre in a PA12 nylon base.

It adds stiffness, increases layer adhesion, all while reducing warping.

This makes it a great choice for drone builders and RC hobbyists.

Next >

Technical Specs

Bending Strength: 57-62 MPa (Z-direction), 23-28% increase from natural PA12
Bending Modulus: 1750-1820 Mpa (Z-direction), 23-28% increase from natural PA12
Impact Strength: 13-14 kJ/m² (Z-direction), 130-140% increase from natural PA12

Recommended Print Settings

• Extrusion Temp: 280 - 330 °C
• Bed Temp: 90 - 120 °C
• Print Speed: 40 - 80mm/s
• Nozzle Size: 0.6+mm toughened nozzle recommended - this material is abrasive

SPOOL SIZE

• Type: Plastic
• Inner Hole: 51mm
• Outer Diameter: 200mm
• Width: 74mm

PACKAGING

Vacuumed sealed in heavy weight plastic bag with dessicant, then boxed. Resealable bag now included to help with proper storage

Product Dimensions: Ø200 x 74mm


Next >

This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product

10% Bulk Discount available; Order 10 or more filament at once, Prepay for your order, Phone 1800-847-333 to order. Conditions apply.