Prices + Stock updated 26 Sep @ 10:05
3DXTech ThermaX PEEK - 1.75mm - Natural - 500g
ThermaX™ PEEK (PolyEtherEtherKetone) is one of the highest-performance polymers in world. PEEK has exceptional mechanical, thermal, and chemical resistance properties making it a go-to material in some of the most demanding applications.
Features
Specs
Support
Please Note: This is an expert level filament. It requires much experience, and a hig build chamber temperature to acheive good results.
ThermaX™ PEEK (PolyEtherEtherKetone) is one of the highest-performance polymers in world. PEEK has exceptional mechanical, thermal, and chemical resistance properties making it a go-to material in some of the most demanding applications.
Print ThermaX™ PEEK parts with Gearbox™ HT2 High-Temp 3D Printer. Check it out HERE.
Product Attributes Include
- Glass Transition Temp (Tg) of 143°C
- Melt Temp (Tm) of 343°C
- Inherent flame resistance (UL94 V-0)
- Outstanding mechanical, thermal, and chemical resistance
- Continuous Use Temperature (CUT) of 260°C, higher for short duration
- Excellent resistance to a broad range of chemicals, such as those used in the oil/gas, automotive, aerospace, industrial, and chemical processing industries
Filament Specifications
- Diameter: 1.75mm (+/- 0.05mm)
- Colors: Natural/Tan
- Larger reel quantities available upon request
Recommended Print Conditions
- Extruder Temp: 375 – 410°C
- Bed Temp: 130 – 145°C
- Bed Prep: Ultem™ Tape is the ideal build surface, glue stick on clean glass is suitable
- Enclosure temp (if your printer is equipped): 70 – 140°C [hotter is better, up to 140°C]
- Print Speed: 10-50 mm/s for 0.2mm layer height, fast as results dictate
- Drying Instructions: Please see the following instructions for when you want to dry out this filament, HERE
Next >
- Spool Outer Diameter: 200mm
- Spool Width: 76mm
- Spool Hole Diameter: 50mm
Recommended Print Conditions
- Extruder Temp: 375 – 410°C
- Bed Temp: 130 – 145°C
- Bed Prep: Ultem™ Tape is the ideal build surface, glue stick on clean glass is suitable
- Enclosure temp (if your printer is equipped): 70 – 140°C [hotter is better, up to 140°C]
- Print Speed: 10-50 mm/s for 0.2mm layer height, fast as results dictate
- Drying Instructions: Please see the following instructions for when you want to dry out this filament, HERE
Product Dimensions: 200 x 200 x 50mm
Next >
This product has no specific warranty. Bilby 3D will honor obligations under Australia Consumer Guarantee regulations if and where they apply to this product
This product is in the categories:
Related Products:
Buy Now
3DXTech Thermax High-Temp Support Material - 1.75mm - Natural- 500g
HTS high-temp break-away support filament is ideal for use in dual extruder 3D printers designed to print high-temp materials. ThermaX™ HTS High-Temp Support can be used as a break-away support with:
- PEKK + PEEK
- Ultem PEI
- PPSU
- PSU
- PPS
Buy Now
Kimya PEKK-A High Temp - 1.75mm - Natural - 250g Spool - UNTIL SOLD OUT
Kimya PEKK-A filament made from Arkema’s KEPSTAN® is intended for technical applications requiring high resistance to temperature (up to 260°C)
Buy Now
3DXTech ThermaX - 1.75mm - Natural - 500g
ThermaX™ PEKK-C (PolyEtherKetoneKetone) is made using Arkema Kepstan® PEKK [ 70/30 copolymer] and is one of the highest performance materials in the world while also being one of the easiest to print ultra-polymers.
Buy Now
3DXTech CarbonX PEEK + 10 Carbon Fibre - 1.75mm - Black - 500g
Carbon Fiber reinforced PEEK 3D Printing Filament is ideal for the most demanding applications
All prices are in Australian Dollars and include GST. Standard Postage & Handling with Australia is $12 flat rate, free for orders over $350. Express Post starts at $15